You have to lift out the playfield, remove the plasticcover over the dmd and pull out the panel that the dmd is attached to

I having issues with the damn highwire ramp. The balls lock up perfect after i added rollover switches, but when the multiballs starts, just the first ball releases and the other two balls are kinda frozen or magnetized together. Any ideas ?

Btw. For my broken neon i used a LED mod from pedretti Mods. I doesnt use a transformator...and i like the purple look. There is a video on youtube.

Cirqus Voltaire Lift Trim

Partnumber: 03-9697

Cirqus Voltaire Backglass Top Trim

Partnumber: 03-9698-1

Cirqus Voltaire Backglass Side Trim

Partnumber: 03-9698-2

I am not sure this helps, but this is what i found.

Greetings daniel

I tried roll over switches but don't get them right. Do they have to be permanently activated by the ball or do they just have to be triggered one time ?
Any ideas of adjustment ?

Reedswitches could be a good idea

Hey guys are there any shops to get the high wire ramp ? The metal one with the locks ? I tried to bend my ramp as suggested, after 2 hours trying i was near to hammer this game down into pieces
I also think the roll over switches maybe work worse than the original one.

I bend in every kind of ways, also i tried to position the ramp in different ways to the post, but no success.

Any pictures of how this ramp should be placed ?

Greetings Dan

Puh...hard question...

There are many thing in this game that are hard to find. First of all the white tube for all the G.I. lamps from the backbox with the cannon coil on it. The coil often breaks the white tube into pieces. A new one really hard to find !

Check this game also for ghosting around the inserts, it is normal on a CV but shouldn't be to bad.

Check for wear around the roll over buttons and that there is not a layover hiding the wear, also check for wear around the ringmaster and the jet bumper.

Inspect all magnets, the normally get flat over time and get the wood around them damaged.

Check the legs and if they caused some cuts in the cabinetdecals.

Ask for the original scrolls, they are also not available all time.

Check the plastictrim around the backglass and the white tube, these are CV only and also not easy to find.

At least chech the spring of the ringmaster, it can easily break over time.

I think this are the biggest ones...

Greetings, it's my all time fav game.

Daniel

The white tub was broken into pieces, i did it with fibre mat and epoxy. Also put a metal plate on it to make it more durable.

Painted it white... All good.

Greetings Dan

20200416_115004 (resized).jpg

20200416_175211 (resized).jpg

20200420_153314 (resized).jpg

20200426_122208 (resized).jpg

20200426_225805 (resized).jpg

I made my own version, it takes time and of course they don't look like repros at all and the Quality is not the same, also they are heavy and need to be drilled or really heavy velcro. I love that game so much, but thousands of dollars ?

20230104_183745 (resized).jpg

Yeah i just made them to complete the look of the game, and because CV is my all time love.

If they don't make a rerun, i made some also for friends and fun.

Cool ! Love it !