(Topic ID: 289499)

WeatherbyMAG's Bally & Stern Restoration Blog

By WeatherbyMAG

3 years ago


Topic Heartbeat

Topic Stats

You

Linked Games

Topic Gallery

View topic image gallery

thumbnail_IMG_20240324_160050 (resized).jpg
thumbnail_IMG_20240324_160014 (resized).jpg
thumbnail_IMG_20240225_155625 (resized).jpg
Pinside_forum_8070403_3 (resized).jpg
thumbnail_IMG_20240218_152520 (resized).jpg
thumbnail_IMG_20240218_152500 (resized).jpg
thumbnail_IMG_20240218_152446 (resized).jpg
thumbnail_IMG_20240218_152512 (resized).jpg
thumbnail_IMG_20240218_152454 (resized).jpg
thumbnail_IMG_20240218_145542 (resized).jpg
thumbnail_IMG_20240218_145526 (resized).jpg
thumbnail_IMG_20240218_145450 (resized).jpg
thumbnail_IMG_20240218_145440 (resized).jpg
thumbnail_IMG_20240218_145434 (resized).jpg
thumbnail_IMG_20240204_115705 (resized).jpg
thumbnail_IMG_20240204_115658 (resized).jpg

There are 506 posts in this topic. You are on page 1 of 11.
#1 3 years ago

Rather than start another game restoration thread (or two or three) I figured I should probably just make an all encompassing post for the multitude of machines I am working on at any given time. These threads are handy for the owners of these machines to see progress as I move along.

It's a Bally/Stern Blog as that's all I work on.

For several machines this will be a continuation of one of these threads:

Flash Gordon Cabinet Restoration: https://pinside.com/pinball/forum/topic/flash-gordon-cabinet-restoration

Bally Kiss Restoration: https://pinside.com/pinball/forum/topic/bally-kiss-restoration-1/page/2#post-6161861

Centaur II Restoration: https://pinside.com/pinball/forum/topic/centaur-ii-restoration#post-6151017

Evel Knievel Restoration: https://pinside.com/pinball/forum/topic/evel-knievel-restoration-many-pics#post-6109972

Kiss got new flashing installed in the backbox & box bolted to the cab..... working on transformer now.

IMG_20210307_124830 (resized).jpgIMG_20210307_124830 (resized).jpgIMG_20210307_124843 (resized).jpgIMG_20210307_124843 (resized).jpgIMG_20210307_124900 (resized).jpgIMG_20210307_124900 (resized).jpg
#2 3 years ago

Cheetah finally got the cab clearcoated... This thing has been painted for I dunno... 3 or 4 months & just been busy with so much other stuff. But this one is starting to get assembled tonight. I'll get some better pics tonight when it's out of the booth where the lighting is funky.

Rumor is, the CPR PF might not be too far away.

IMG_20210307_183345 (resized).jpgIMG_20210307_183345 (resized).jpgIMG_20210307_183356 (resized).jpgIMG_20210307_183356 (resized).jpgIMG_20210307_183425 (resized).jpgIMG_20210307_183425 (resized).jpgIMG_20210307_183524 (resized).jpgIMG_20210307_183524 (resized).jpgIMG_20210307_183531 (resized).jpgIMG_20210307_183531 (resized).jpg
#3 3 years ago

The Rapid Fire cabinet on Centuar II has been kicking my butt, but is finally getting close to color.

IMG_20210307_162601 (resized).jpgIMG_20210307_162601 (resized).jpgIMG_20210307_162604 (resized).jpgIMG_20210307_162604 (resized).jpgIMG_20210307_162609 (resized).jpgIMG_20210307_162609 (resized).jpgIMG_20210307_162623 (resized).jpgIMG_20210307_162623 (resized).jpg
#4 3 years ago

Evel Knievel has been stripped & repairs begun.

The Corners on this were in bad shape, needed a lot of fiberglass resin work. Plus I had a lot of wood separation when I removed some of the inner wood pieces.

I filled in all the factory slots, I'm going to re-attach the wood bracing a bit differently than how Bally did it to make it look cleaner. This game is getting all new wood on inside of cab including corner braces. I have a bit more strengthening work on outside before I pull the corners & start working on them.

IMG_20210124_132507 (resized).jpgIMG_20210124_132507 (resized).jpgIMG_20210307_143719 (resized).jpgIMG_20210307_143719 (resized).jpgIMG_20210307_143726 (resized).jpgIMG_20210307_143726 (resized).jpgIMG_20210307_143733 (resized).jpgIMG_20210307_143733 (resized).jpgIMG_20210307_143739 (resized).jpgIMG_20210307_143739 (resized).jpgIMG_20210307_143748 (resized).jpgIMG_20210307_143748 (resized).jpgIMG_20210307_143755 (resized).jpgIMG_20210307_143755 (resized).jpgIMG_20210307_143802 (resized).jpgIMG_20210307_143802 (resized).jpgIMG_20210307_143820 (resized).jpgIMG_20210307_143820 (resized).jpg
#5 3 years ago

Flash Gordon is getting some black.......

IMG_20210307_163529 (resized).jpgIMG_20210307_163529 (resized).jpgIMG_20210307_163543 (resized).jpgIMG_20210307_163543 (resized).jpg
#6 3 years ago

& Then there's my favorite new project.....

I had a wanted ad up that I wanted a piece of crap condition Meteor to do a Star Gazer out of........ I think I found one to fit the bill.

This baby was ROUGH.

Someone hacked large gouge in it to install a Williams shooter housing etc. All the corners..... had major damage.

IMG_20210206_143536 (resized).jpgIMG_20210206_143536 (resized).jpgIMG_20210206_143542 (resized).jpgIMG_20210206_143542 (resized).jpgIMG_20210206_143601 (resized).jpgIMG_20210206_143601 (resized).jpgIMG_20210206_143611 (resized).jpgIMG_20210206_143611 (resized).jpgIMG_20210206_144102 (resized).jpgIMG_20210206_144102 (resized).jpgIMG_20210206_144106 (resized).jpgIMG_20210206_144106 (resized).jpgIMG_20210206_144115 (resized).jpgIMG_20210206_144115 (resized).jpgIMG_20210206_145819 (resized).jpgIMG_20210206_145819 (resized).jpgIMG_20210206_161451 (resized).jpgIMG_20210206_161451 (resized).jpgIMG_20210206_161506 (resized).jpgIMG_20210206_161506 (resized).jpg
#7 3 years ago

Same deal as the Evel Knievel... this one will get all new wood made for it.

Not ready for paint yet, but it's a heck of a lot closer to it than it was a few weeks ago! Hard to believe it is the same cabinet.

Both these machines are going to get custom made clear coated maple bottoms installed.

IMG_20210307_150029 (resized).jpgIMG_20210307_150029 (resized).jpgIMG_20210307_150033 (resized).jpgIMG_20210307_150033 (resized).jpgIMG_20210307_150038 (resized).jpgIMG_20210307_150038 (resized).jpgIMG_20210307_150123 (resized).jpgIMG_20210307_150123 (resized).jpgIMG_20210307_150149 (resized).jpgIMG_20210307_150149 (resized).jpgIMG_20210307_150200 (resized).jpgIMG_20210307_150200 (resized).jpgIMG_20210307_150204 (resized).jpgIMG_20210307_150204 (resized).jpgIMG_20210307_150214 (resized).jpgIMG_20210307_150214 (resized).jpgIMG_20210307_150225 (resized).jpgIMG_20210307_150225 (resized).jpgIMG_20210307_150319 (resized).jpgIMG_20210307_150319 (resized).jpgIMG_20210307_150325 (resized).jpgIMG_20210307_150325 (resized).jpgIMG_20210307_150332 (resized).jpgIMG_20210307_150332 (resized).jpgIMG_20210307_150341 (resized).jpgIMG_20210307_150341 (resized).jpg
#8 3 years ago

Lol, like 6 games going at the same time. Good for you. .

#9 3 years ago

Started re-assembling Cheetah cabinet.

IMG_20210308_205908 (resized).jpgIMG_20210308_205908 (resized).jpgIMG_20210308_205914 (resized).jpgIMG_20210308_205914 (resized).jpgIMG_20210308_205921 (resized).jpgIMG_20210308_205921 (resized).jpg
#10 3 years ago

Made a new transformer board for Cheetah....this machine did'nt have one when it was purchased & brought to me. SO I made one out of 3/4" wood (factory was 1/2") & clear coated it to show off the woodgrain a little better. Next one I do, I may stain to a little darker color. I thought the clear would darken this blonde wood a little more than it did.

Getting closer on the cab on it.

Going to make a new speaker board for it as well, as the original is junk.

IMG_20210309_205529 (resized).jpgIMG_20210309_205529 (resized).jpgIMG_20210309_205533 (resized).jpgIMG_20210309_205533 (resized).jpgIMG_20210310_201911 (resized).jpgIMG_20210310_201911 (resized).jpg
#11 3 years ago

Kiss is getting closer. Display board mounted.... I will clean up & re-route wiring once the PF wiring harness is ran. New Rectifier board, cleaned up & re-routed wiring on transformer & the trans shield.

Since it's a KISS, I'll probably end up with different bulbs in it, but 2SMD Comet Warm Whites will give me a starting point.

IMG_20210314_153837 (resized).jpgIMG_20210314_153837 (resized).jpgIMG_20210314_153849 (resized).jpgIMG_20210314_153849 (resized).jpgIMG_20210314_190658 (resized).jpgIMG_20210314_190658 (resized).jpgIMG_20210314_203720 (resized).jpgIMG_20210314_203720 (resized).jpgIMG_20210314_204637 (resized).jpgIMG_20210314_204637 (resized).jpg
#12 3 years ago

Looking very nice. It’s amazing how clean they look.

#13 3 years ago

Cheetah transformer/rectifier wired up

IMG_20210315_172150 (resized).jpgIMG_20210315_172150 (resized).jpg
#14 3 years ago

Flash Gordon got it's "stripes" as it were....

Tried about 5 different shades of gold before I came up with this one that I was most happy with. In the up close pics, you can see how same piece can give off different look depending on flash/lighting/camera angle etc.

IMG_20210316_194152 (resized).jpgIMG_20210316_194152 (resized).jpgIMG_20210316_194226 (resized).jpgIMG_20210316_194226 (resized).jpgIMG_20210316_194256 (resized).jpgIMG_20210316_194256 (resized).jpgIMG_20210316_194313 (resized).jpgIMG_20210316_194313 (resized).jpg
#15 3 years ago
Quoted from WeatherbyMAG:

Flash Gordon got it's "stripes" as it were....
Tried about 5 different shades of gold before I came up with this one that I was most happy with. In the up close pics, you can see how same piece can give off different look depending on flash/lighting/camera angle etc.
[quoted image][quoted image][quoted image][quoted image]

Damn that looks amazing. I was speaking with Tom about when I can bring mine down. You guys did a Playboy for me. Flash Gordon on deck. Can’t wait!!

#16 3 years ago

Displays for KISS are assembled. Still have to install the filters & foam surrounds.

IMG_20210317_205440 (resized).jpgIMG_20210317_205440 (resized).jpgIMG_20210317_205453 (resized).jpgIMG_20210317_205453 (resized).jpg
1 month later
#17 2 years ago

Cheetah got side rails, flipper buttons, shooter rod hardware finally. Very impressed with the Pinball Life Stern side rails, excellent fit & very heavy gauge stainless.

I think the new CPR PF for this is being delivered tomorrow. Discussed it with owner, going to let that sit for at least a month to see what happens with clear & inserts. I just had a FG CPR come in last week that has sat for a few months since the last batch was ran & inserts are moving & cracked through the clear. So I'm going to be a little more hesitant on this one to give it some time before doing anything with it.

IMG_20210418_163655 (resized).jpgIMG_20210418_163655 (resized).jpgIMG_20210418_163724 (resized).jpgIMG_20210418_163724 (resized).jpgIMG_20210418_163811 (resized).jpgIMG_20210418_163811 (resized).jpgIMG_20210418_163823 (resized).jpgIMG_20210418_163823 (resized).jpg
#18 2 years ago

FG got it's final gold stripes......

Will paint the backbox support black here tonight & then it's ready for clear.

IMG_20210418_190325 (resized).jpgIMG_20210418_190325 (resized).jpgIMG_20210418_190335 (resized).jpgIMG_20210418_190335 (resized).jpgIMG_20210418_190357 (resized).jpgIMG_20210418_190357 (resized).jpgIMG_20210418_190409 (resized).jpgIMG_20210418_190409 (resized).jpg
#19 2 years ago

Kiss PF just about done. Got the target banks all wired up & coil ultrasonic'd & new Bally wrapper.

I'm also going to start labeling all of the connectors now on machines I restore. I know exactly where all these connectors go, but I think will be helpful for future owners on down the line.

I had some polished metal on this PF get some surface rust from my garage getting too humid a few weeks ago. Huge PITA, went back through & pulled a lot of stuff & re-polished. Wil not happen in a normal environment, but every year coming out of winter & into spring I get a day or two where the heat is not on & the humidity screws me. I've made some changes to assure that does'nt happen again.

IMG_20210418_163540 (resized).jpgIMG_20210418_163540 (resized).jpgIMG_20210418_163559 (resized).jpgIMG_20210418_163559 (resized).jpgIMG_20210418_163614 (resized).jpgIMG_20210418_163614 (resized).jpgIMG_20210418_163634 (resized).jpgIMG_20210418_163634 (resized).jpg
#20 2 years ago

Centaur II Cab is more than likely getting painted black tomorrow eve. Final pre-paint prep tonight. Started going through cab parts for re-assembly. Ultrasonic'd the harness, started polishing parts etc.

The PF on this is ready for clear this week. I have to clear it & a second Flash Gordon PF together. Then final touch ups will be done & it will be ready to start re-populating.

IMG_20210418_184720 (resized).jpgIMG_20210418_184720 (resized).jpgIMG_20210418_184727 (resized).jpgIMG_20210418_184727 (resized).jpgIMG_20210418_184811 (resized).jpgIMG_20210418_184811 (resized).jpg
#21 2 years ago

As part of my humidity reckoning.....as well as just needing more space etc. I built a new Pinball assembly clean room. This knocked a couple weeks of pin work backwards, but hopefully people realize that this will make quality of my work going forward that much better & will be worth the slight delay.

Polycuramine floor, 38 more feet of workbench space, 6 more LED lights, 38 feet of shelving, 7 more outlets etc.

I'm up to 70 feet of workbench's in my main garage & another 6 feet in the paint booth.... I tend to like workbench room & lot's of light. My Wife always jokes that I'm afraid of the dark. I just like to be able to see what I'm doing.

IMG_20210418_163421 (resized).jpgIMG_20210418_163421 (resized).jpgIMG_20210418_163436 (resized).jpgIMG_20210418_163436 (resized).jpgIMG_20210418_163448 (resized).jpgIMG_20210418_163448 (resized).jpgIMG_20210418_163458 (resized).jpgIMG_20210418_163458 (resized).jpg
#22 2 years ago
Dang (resized).jpgDang (resized).jpg
#23 2 years ago

More Flash Gordon resto pics!! ; )

#24 2 years ago
Quoted from Flash71:

More Flash Gordon resto pics!! ; )

Ask & ye shall receive.

IMG_20210419_210026 (resized).jpgIMG_20210419_210026 (resized).jpg
#25 2 years ago

& that's your FG behind Centaur on the far left.

IMG_20210420_193117 (resized).jpgIMG_20210420_193117 (resized).jpg
#26 2 years ago

C2 is black.....

I'm convinced if Darth Vader owned a pinball machine, a Centaur 2 would be it.

I'll let this sit for a day or two while I figure out shade of silver for it.

IMG_20210420_193009 (resized).jpgIMG_20210420_193009 (resized).jpgIMG_20210420_193028 (resized).jpgIMG_20210420_193028 (resized).jpgIMG_20210420_193036 (resized).jpgIMG_20210420_193036 (resized).jpgIMG_20210420_193055 (resized).jpgIMG_20210420_193055 (resized).jpgIMG_20210420_193104 (resized).jpgIMG_20210420_193104 (resized).jpgIMG_20210420_193127 (resized).jpgIMG_20210420_193127 (resized).jpgIMG_20210420_193141 (resized).jpgIMG_20210420_193141 (resized).jpgIMG_20210420_193151 (resized).jpgIMG_20210420_193151 (resized).jpgIMG_20210420_193214 (resized).jpgIMG_20210420_193214 (resized).jpg
#27 2 years ago

Looks great

#28 2 years ago
Quoted from WeatherbyMAG:

& that's your FG behind Centaur on the far left.
[quoted image]

Nice!!!!

#29 2 years ago

Red....

IMG_20210422_203922 (resized).jpgIMG_20210422_203922 (resized).jpg
#30 2 years ago

Centaur got initial PF clear after many many hours of touch ups. I'll sand this down, do final touch ups, install insert decals etc before next coat of clear.

Also shot some more clear on FG lower PF that customer had an accident with.

IMG_20210425_195905 (resized).jpgIMG_20210425_195905 (resized).jpgIMG_20210425_195924 (resized).jpgIMG_20210425_195924 (resized).jpgIMG_20210425_195945 (resized).jpgIMG_20210425_195945 (resized).jpg
#31 2 years ago

KISS PF finally in the game...... pay no attention to angle of flippers, they are just in there, as I had to pull flipper mechs back out for re-polishing last week. Also still have to install left spinner. But it's pretty close now.... coin door & few small little things left.

IMG_20210425_200112 (resized).jpgIMG_20210425_200112 (resized).jpg
#32 2 years ago

I bought this Bobby Orr a few weeks ago off of a tech where I work. He found it through a neighbor of his, guy was moving & needed it gone. I don't know exactly what I'm doing with it yet, probably will be sold when done. I'd actually like to have it ready to sell at Allentown if that happens. The PF in this is pretty decent, that's where my conundrum lies... do I invest in a CPR PF or just touch up & clear the factory PF. Undecided.

The rest is pretty straight forward.... cab wood is in really nice shape, this will be easy to make nice compared to some of the others I have done recently.

IMG_20210425_125502 (resized).jpgIMG_20210425_125502 (resized).jpgIMG_20210425_125433 (resized).jpgIMG_20210425_125433 (resized).jpgIMG_20210425_125417 (resized).jpgIMG_20210425_125417 (resized).jpgIMG_20210424_173445 (resized).jpgIMG_20210424_173445 (resized).jpgIMG_20210424_173438 (resized).jpgIMG_20210424_173438 (resized).jpgIMG_20210424_173433 (resized).jpgIMG_20210424_173433 (resized).jpg
#33 2 years ago

Centaur sanded & more touch ups before next round of clear for leveling.

IMG_20210427_193320 (resized).jpgIMG_20210427_193320 (resized).jpgIMG_20210427_193418 (resized).jpgIMG_20210427_193418 (resized).jpgIMG_20210427_193449 (resized).jpgIMG_20210427_193449 (resized).jpg
#34 2 years ago

Kiss Apron got bead blasted, painted & decal'd. Working on coin door right now. typically takes me about 10 hours to tear a door down, polish everything & re-assemble.

IMG_20210503_062952 (resized).jpgIMG_20210503_062952 (resized).jpgIMG_20210503_062957 (resized).jpgIMG_20210503_062957 (resized).jpgIMG_20210503_063039 (resized).jpgIMG_20210503_063039 (resized).jpg
#35 2 years ago

Cheetah PF looks to be one of the better prints I have seen out of the pics that have been posted. Owner & I laid this next to his original & looked at colors. I think CPR did an excellent job on this PF for a very small limited run item. The colors are dead on other than the womans leg wrap, slightly different orange/red shade, but no big deal. There is also some differences in some of the fonts used, but again that's getting very picky.

Overall I'd say this is one of the nicest CPR Repo's I have seen.

IMG_20210503_063015 (resized).jpgIMG_20210503_063015 (resized).jpg
#36 2 years ago

Bobby Orr is pretty close to ready for primer......

IMG_20210505_195206 (resized).jpgIMG_20210505_195206 (resized).jpgIMG_20210505_195210 (resized).jpgIMG_20210505_195210 (resized).jpgIMG_20210505_195216 (resized).jpgIMG_20210505_195216 (resized).jpgIMG_20210505_195219 (resized).jpgIMG_20210505_195219 (resized).jpgIMG_20210505_195232 (resized).jpgIMG_20210505_195232 (resized).jpg
#37 2 years ago

Flash71's FG Cab also almost ready for primer......

IMG_20210505_190844 (resized).jpgIMG_20210505_190844 (resized).jpgIMG_20210505_190858 (resized).jpgIMG_20210505_190858 (resized).jpgIMG_20210505_190922 (resized).jpgIMG_20210505_190922 (resized).jpg
#38 2 years ago

2 Flash Gordon backboxes also almost ready for Primer, I sealed the bottom of the Viking BB with Fiberglass resin as it was starting to flake. The True FG Backbox was in better shape on the bottom, but the rear seams were not great, so I enlarged the seam & fill it with Fiberglass resin to strengthen it & eliminate any future possibility of seam showing through paint.

IMG_20210505_184319 (resized).jpgIMG_20210505_184319 (resized).jpgIMG_20210505_184325 (resized).jpgIMG_20210505_184325 (resized).jpgIMG_20210505_200805 (resized).jpgIMG_20210505_200805 (resized).jpgIMG_20210505_200812 (resized).jpgIMG_20210505_200812 (resized).jpgIMG_20210505_200820 (resized).jpgIMG_20210505_200820 (resized).jpgIMG_20210505_200835 (resized).jpgIMG_20210505_200835 (resized).jpg
#39 2 years ago
Quoted from WeatherbyMAG:

Flash71's FG Cab also almost ready for primer......
[quoted image][quoted image][quoted image]

Right on!! Can’t wait to see those stencils.

#40 2 years ago

Kiss coin door almost finished up.

IMG_20210506_205846 (resized).jpgIMG_20210506_205846 (resized).jpgIMG_20210506_205852 (resized).jpgIMG_20210506_205852 (resized).jpg
#41 2 years ago
Quoted from WeatherbyMAG:

Kiss coin door almost finished up.
[quoted image][quoted image]

Wow! Super nice

#42 2 years ago

KISS Coin door got finished up. I eliminated the center coin mech & did a pair of quarter mechs on the outboards so that it matches the Evel Knievel that the owner I'm sure will have sitting side by side with KISS in his game room.

IMG_20210510_160102 (resized).jpgIMG_20210510_160102 (resized).jpgIMG_20210510_160111 (resized).jpgIMG_20210510_160111 (resized).jpgIMG_20210510_160238 (resized).jpgIMG_20210510_160238 (resized).jpgIMG_20210510_160357 (resized).jpgIMG_20210510_160357 (resized).jpg
#43 2 years ago

Got KISS fired up for 1st time & began de-bugging it. One feature light on PF to deal with, front pop bumper switch needs adjusted & I think I have a bad original diode on the ball saver gate.

IMG_20210510_183726 (resized).jpgIMG_20210510_183726 (resized).jpgIMG_20210510_183829 (resized).jpgIMG_20210510_183829 (resized).jpg
#44 2 years ago
Quoted from WeatherbyMAG:

Got KISS fired up for 1st time & began de-bugging it. One feature light on PF to deal with, front pop bumper switch needs adjusted & I think I have a bad original diode on the ball saver gate.
[quoted image][quoted image]

freak’n awesome!

#45 2 years ago

Finished re-clearing & buffing a CPR FG re-screen that a buddy had a small accident with. I just think this is neat picture with the reflection of my dual halogen 500 W work lights.

3M Perfect it Machine Polish is gooood stuff. Now I get to spend a couple hours cleaning all the buffing compound residue out of all the holes & slots & should be ready for him to start reassembling again.

IMG_20210512_175610 (resized).jpgIMG_20210512_175610 (resized).jpg
#46 2 years ago

Tom's FG got clear coated.

IMG_20210513_205236 (resized).jpgIMG_20210513_205236 (resized).jpgIMG_20210513_205300 (resized).jpgIMG_20210513_205300 (resized).jpgIMG_20210513_205345 (resized).jpgIMG_20210513_205345 (resized).jpgIMG_20210513_205400 (resized).jpgIMG_20210513_205400 (resized).jpgIMG_20210513_205407 (resized).jpgIMG_20210513_205407 (resized).jpgIMG_20210513_205419 (resized).jpgIMG_20210513_205419 (resized).jpgIMG_20210513_205428 (1) (resized).jpgIMG_20210513_205428 (1) (resized).jpgIMG_20210513_205445 (resized).jpgIMG_20210513_205445 (resized).jpg
#47 2 years ago

For people who missed the original thread... That FG cabinet has come a long way.

IMG_20210113_182635 (resized).jpgIMG_20210113_182635 (resized).jpgIMG_20210113_182644 (resized).jpgIMG_20210113_182644 (resized).jpgIMG_20210113_182724 (resized).jpgIMG_20210113_182724 (resized).jpgIMG_20210113_204812 (resized).jpgIMG_20210113_204812 (resized).jpgIMG_20210513_205428 (1) (resized).jpgIMG_20210513_205428 (1) (resized).jpg
#48 2 years ago

Wow! Great work! Well done!

#49 2 years ago

Incredible work! Mine won’t be as challenging. Lol!

#50 2 years ago

Centaur PF final buffed & cleaned out all the holes/slots. Sanded & painted the backside.

Going on the rotisserie tonight.

IMG_20210516_164335 (resized).jpgIMG_20210516_164335 (resized).jpgIMG_20210516_164411 (resized).jpgIMG_20210516_164411 (resized).jpgIMG_20210516_164446 (resized).jpgIMG_20210516_164446 (resized).jpgIMG_20210516_164541 (resized).jpgIMG_20210516_164541 (resized).jpgIMG_20210516_164624 (resized).jpgIMG_20210516_164624 (resized).jpgIMG_20210516_164642 (resized).jpgIMG_20210516_164642 (resized).jpgIMG_20210516_164652 (resized).jpgIMG_20210516_164652 (resized).jpgIMG_20210516_164729 (resized).jpgIMG_20210516_164729 (resized).jpgIMG_20210516_164740 (resized).jpgIMG_20210516_164740 (resized).jpgIMG_20210516_164946 (resized).jpgIMG_20210516_164946 (resized).jpgIMG_20210516_165020 (resized).jpgIMG_20210516_165020 (resized).jpgIMG_20210516_165806 (resized).jpgIMG_20210516_165806 (resized).jpgIMG_20210516_165813 (resized).jpgIMG_20210516_165813 (resized).jpgIMG_20210516_165840 (resized).jpgIMG_20210516_165840 (resized).jpgIMG_20210516_165844 (resized).jpgIMG_20210516_165844 (resized).jpgIMG_20210516_165852 (resized).jpgIMG_20210516_165852 (resized).jpgIMG_20210516_165932 (resized).jpgIMG_20210516_165932 (resized).jpgIMG_20210516_172824 (resized).jpgIMG_20210516_172824 (resized).jpg
Promoted items from the Pinside Marketplace
$ 3.00
Cabinet Parts
20eyes
Cabinet parts
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
Shooter rods
$ 10.00
Playfield - Decals
Metal-Mods
Decals
$ 69.00
Gameroom - Decorations
Pinball Pimp
Decorations
Wanted
Machine - Wanted
San Francisco, CA
$ 10.00
$ 2.50
Lighting - Led
Pinballrom
Led
$ 69.00
Electronics
Pinball Haus
Electronics
$ 149.95
Boards
Allteksystems
Boards
$ 12.00
Playfield - Toys/Add-ons
UpKick Pinball
Toys/Add-ons
From: $ 150.00
Displays
PinballSolutions.eu
Displays
$ 55.00
Displays
PinballSolutions.eu
Displays
$ 10.00
Lighting
Yoppsicle
Lighting
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
Shooter rods
$ 20.00
Cabinet - Decals
Pinball Haus
Decals
$ 95.00
Cabinet - Sound/Speakers
Pinball Mod Co.
Sound/Speakers
$ 100.00
Cabinet - Shooter Rods
Super Skill Shot Shop
Shooter rods
$ 12.00
Electronics
Third Coast Pinball
Electronics
$ 10.00
3,195
Machine - For Sale
Livermore, CA
Trade
Machine - For Trade
Myrtle Beach, SC
From: £ 135.00
Electronics
Retro Electro Designs
Electronics
From: $ 3.50
Playfield - Other
Rocket City Pinball
Other
$ 5.00
Cabinet - Other
Creekside Hideaway, LLC
Other
$ 90.00
$ 18.95
Eproms
Pinballrom
Eproms
$ 10.00
Playfield - Decals
Metal-Mods
Decals
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
Shooter rods
$ 15.00
Playfield - Toys/Add-ons
RobTune
Toys/Add-ons
There are 506 posts in this topic. You are on page 1 of 11.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/weatherbymag-s-bally-amp-stern-restoration-blog?hl=weatherbymag and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.