(Topic ID: 241704)

weak right flipper majorettes


By marioc

1 year ago



Topic Stats

  • 5 posts
  • 3 Pinsiders participating
  • Latest reply 1 year ago by fourstarstout
  • No one calls this topic a favorite

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    One image has been uploaded to this topic. (View topic image gallery).

    4BDDF4FA-957F-4CC1-B425-F225BABE5632 (resized).jpeg

    #1 1 year ago

    looks like the left one was replaced the right one looks older, both move freely the left flipper when pushed even sounds louder and works great

    do solenoids go bad and weaken? I tried playing with the switch no luck

    #2 1 year ago
    4BDDF4FA-957F-4CC1-B425-F225BABE5632 (resized).jpeg
    #3 1 year ago

    It looks like the EOS switch on the right is open. This switch should be adjusted so that it opens only when the flipper is fully extended.

    If the switch is indeed closed in the “resting” position, then make sure the contacts are clean.

    You could also check to see that the flipper button switch is clean and properly adjusted. A strong flipper requires a low resistance path, so essentially any of these conditions could be the culprit.

    If you check all of these things and still have a weak flipper, I would check the condition of the plastic coil sleeve and any play in the linkage. At this point, a bad coil should be ruled out.

    #4 1 year ago

    well something went wrong I played with eos switch now the flippers wont work , it lights up now no flippers, or bumpers and points registering, I checked fuses all are good, the ball knockouts work

    #5 1 year ago

    In the resting position the EOS switch should be closed as previous poster stated. When you push the plunger into the coil the EOS switch should open when the plunger is just about or fully pushed into the coil. Check the contacts on the EOS and make sure they are clean and touching each other when not activated. Make sure no wires broke off of the coil or EOS.
    If the game was playing other than a weak flipper before think of what else you did. Is the score motor in the right position? Try turning the motor 1/3 around and try starting it. If nothing happens rotate 1/3 more and try again. If nothing happens again try resetting the bank manually.

    Promoted items from the Pinside Marketplace
    $ 125.00
    Playfield - Toys/Add-ons
    pinballmod
    $ 109.99
    $ 24.99
    Lighting - Led
    Lee's Parts
    $ 76.95
    Cabinet - Shooter Rods
    Super Skill Shot Shop
    $ 289.00
    From: $ 19.99
    $ 75.00
    Playfield - Toys/Add-ons
    Whitewater pinball mods
    From: $ 69.95
    Cabinet - Shooter Rods
    Super Skill Shot Shop
    $ 27.99
    Eproms
    Matt's Basement Arcade
    $ 68.00
    Playfield - Toys/Add-ons
    ModFather Pinball Mods
    $ 65.00
    $ 39.99
    Lighting - Interactive
    Lee's Parts
    From: $ 99.99
    Cabinet - Other
    Lighted Pinball Mods
    From: $ 19.50
    $ 369.00
    Cabinet - Decals
    Mircoplayfields
    $ 27.00
    Playfield - Toys/Add-ons
    ModFather Pinball Mods
    $ 24.99
    Lighting - Led
    Lee's Parts
    From: $ 220.00
    From: $ 50.00
    Gameroom - Decorations
    Pinball Art Prints
    From: $ 22.95
    Playfield - Protection
    ULEKstore
    $ 16.00
    Cabinet - Sound/Speakers
    ModFather Pinball Mods
    $ 20.00
    Cabinet - Other
    Filament Printing

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside