I have bad luck when it comes with getting rubber ring kits for pins. I've owned two pins and both didn't have maps in their kits. First I had an ES and got the kit from Pinball Resource. No diagram whatsoever and couldn't find one online. Now for my WCS94, I just got a kit from Marco and the diagram it came with was from the manual with a diagram of all the upper playfield parts and no parts list to match the numbers up with. I have the full manual but it's going to be a real pain again to do this. I know the whole "replace them one at a time to make sure" technique but I'd like to know what is SUPPOSED to go where because you never know if the kit done before you was done right. Just frustrating.

Does anyone have a good diagram for WCS94? Once again a search turns up nothing. Thanks!

Yeah. That's what I figured I'd have to do. Right now I already have some that don't look like the right ones were on there. In the back lanes behind the pop bumpers, the lane posts are not all using the same size even though all the posts are the same. Looks like they were replace with what would fit.

Anyone else have anything?

Well I finished up my kit yesterday. Ended up tearing down most of the playfield to clean it and the other parts. I ran most of the small parts through the ultrasonic cleaner, and hand cleaned the rest. The game turned out really nice. Rebuilt the shooter and bought new balls too.

Overall I was pretty disappointed with the rubber ring kit, at least for this machine. I was short a few of the really small rings, and had extra of some larger ones. I had one location that I had to use a ring that was too large just to make sure there was something there. I'm going to have to order some individuals now. Also, the shooter tip was an ugly off-white instead of white. Is that normal? My last kit had a really nice tip. The tip I removed was brown so at least it looks better now.

After some switch and bulb troubleshooting I got everything working 100% after the teardown and the machine plays great. After I fix a few of the rubbers that I need to order, I'll then look at the rest of the long-term upgrades I'd like to do. I'm planning to powder coat the legs and rails, convert to LEDs, and maybe replace the soccer ball.