Hey all,
I'm having some problems with a discrepancy between the schematic and the manual for my T2. The schematic indicates that at position R25 on the power driver board, there should be a 68 ohm, 1/2 watt resistor. In the manual, it indicates that the resistor should be a 68 ohm, 1/4 watt resistor. Since everything else in the area is 1/4 watt, I elected to order a bunch of the 1/4 watt ones. However, the new resistors appear to be quite a bit smaller than the existing, working ones in positions R29, R33, and so on. As such, I'm left with he question: 1/4 watt or 1/2 watt? Any help would be greatly appreciated. Thanks in advance.
Luke