Hopkins, MN
Quoted from dung:Good luck finding one. I paid 2400 for one with a burned up diverter coil. Working on fixing it right now. It will be nice when I am done, but it was literally the only thing I found for sale.
The usual cause is the up coil for the drop target has three wires to one lug, two thick purple/green stripe wires and a thin purple(more lavender looking)with green stripe. The thin one breaks off, this is your diode tie back wire. And takes out a transistor on the small driver board in the top right side of the head and this burns up a diverter coil.
A good fix is remove the three wires, solder to a single wire. Solder the single wire to the coil. That way if the single wire comes off the coil you don't blow stuff up.
LTG 
