Quoted from chknlil:Afternoon all! I'm doing a playfield swap using a mirco playfield. Everything has been going well with preparations I have two of the three wiring harnesses off the switch harness remains. I've been moving over some solenoids etc. Today I ran into my first problem. The pre-drilled holes appear to be wrong in most all locations. So when this happens do I just drill my own and move things where it looks like they should be? Also I've noticed the distance from the side to the holes in the playfield are different on my original playfield and my mirco. What do I do here? Keep going and hope for the best? Things seem to be off enough that I'm a bit concerned about continuing. Thoughts? Anyone experienced this?[quoted image][quoted image][quoted image][quoted image]
I have a recently restored machine with the micro field. I can send you some pics if needed. I didn't do the swap so I can't tell if new holes were drilled. Let me know if you need any references and I'll take pictures of mine.