Sorcerer is at the tippy top of my want list. Can't wait until I find a nice one!
You're currently viewing posts by Pinsider MMP.
Click here to go back to viewing the entire thread.
Wondering if anyone can help out- I recently got a Sorcerer but today it would not start a game. I noticed these 3 wires taped together by the coin door, can anyone tell me if these are supposed to be connected?
I went into the switch test and the only odd thing I see is the right sling will function, but does not display the switch number or make a noise during the test. Ball trough and start button switches seem fine.
Quoted from bigfoot53:Can you clairify the wire colors?
I see black / red that goes to the memory protect switch
what looks like white / grey for High score reset
and a yellow or white
Is that correct ?
One is a black-red, the other two look similar but one may be dingy. they are white with light blue writing, one goes towards the coin door service buttons, the other heads towards the rear.
Those 3 wires I don't think are supposed to be together. I left the black-red disconnected and then was able to move max credits down to zero. It was 30 and playing before so I'm not sure why, but changing it to free play max credits zero and my game is playing again.
Last thing- if anyone can tell me where the black-red should be connected?
Quoted from punkin:Is there a free play setting on this machine? I have to take it to a show in a few months and would like to do better than 40 credits and open the door for more.
I just had a similar issue, I think that you move maximum credits to zero for free play.
Could someone with a correct configuration of posts and rubber rings please post a couple of close ups of the back areas - under/side of ramp and below demon targets? I've got mine torn down for cleaning and need to make some corrections.
Quoted from lizzyd:I designed these Sorcerer apron cards today and wanted to share. I just put them in my pinside store if anyone wants me to print and laminate some for you.
https://pinside.com/pinball/market/shops/1256-upkick-pinball/03922-sorcerer-apron-cards-
[quoted image][quoted image]
I ordered these cards and thought they were money well spent. Very nice looking and laminated, so better than I could do and save me some trouble printing.
Quoted from SantaEatsCheese:Just curious, are the screws in all of yours painted orange, or is that a one off with mine. I think it is a really nice touch.
Hey glad you like the wood screws. Looks like you have a game that passed through my house for a bit. I was pretty happy with the Titan color choices I made on that one. Game plays nicely too. I try not to go overboard with those, but if a screw sits on plastic I do like to paint it black or color match it.
You're currently viewing posts by Pinsider MMP.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/wanted-sorcerer-cabinet-stencils?tu=MMP and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.