Anyone? This happens on my jungle lord as well.
Quoted from chaosrooster:Hey folks, I recently acquired a Sorcerer that I'm keeping at a friend's house. It has a few issues that I've been working on and unfortunately the game has been unplayable since I bought it.
One of the biggest problems is the 10K and 50K drop targets sometimes get stuck down and won't reset. Upon inspection I noticed the T shaped base of the drop targets are getting stuck behind the drop target reset plate. Wiggling the reset plate I found there is just enough play in the plunger/reset plate to turn the plate giving the drop targets enough room to fall behind the teeth of the reset plate causing them to get stuck. When the the reset plate is turned slightly clockwise the 10k drop target is affected and if it turns slightly counter clockwise the 50K target is affected.
Tightening up the movement of the reset plate and plunger should fix the issue but I haven't been successful. The lock nut behind the reset plate is on tight. The coil has a cool sleeve so no extra movement there. I tightened the screws of the bracket holding the coil in place as the coil moved a little bit when I wiggled it. I also made sure all the drop targets were screwed onto the assembly tight. Nothing has worked and I'm kinda stumped at this point. I searched in this thread but didn't see anyone having this exact issue. Any help is greatly appreciated. Thanks.