I don't think CPR ever made TZ playfields.

Mirco did, however.

If you have a sample with the third magnet installed, OR if you want to add a third magnet, then go for the 3 magnet version.

Otherwise, pick the two-magnet version.

Be very carefull with the Mirco PFs. I got one of the early pastel colored ones and I looked at it a year later and ALL the inserts were ghosted. I asked him to make it good and he sent me another regular one which looked great but on further inspection the clear is coming off right under the special insert on the left outlane. Its a pisser as there is no way he is going to give me another one so I will have to send these to be fixed. I guess I can sell one to pay for fixing the other put its still a PITA to have to do this. CPR makes the best repro PF of anyone. Mirco is a nice guy and I don't want to run him down but I guess I got a shit hand twice in a row. Actually I have gotten 3 bad PFs from him. My WH20 PF had issues as well.

Yeah, I've seen reports of the clear lifting, and on clear that was far too thick. But I was aware all these were on the first run of fields, and not the 2nd one. However, I could be wrong - just what I heard.

I've done a few Mirco swaps. No problems at all, even years later. His stuff is good and he stands behind it.

I had three AFM PFs that were beautiful in every way but I have returned 3 TZ PFs. The first had dots all over it from the bubble wrap the second had ghosted inserts and the third had the clear lifting on a quarter size spot beneath the special insert. Im going to send the last one to be repaired.

I would honestly stick with your current PF, get it touched up and cleared, IMHO.

If you are doing a HEP, just let Chris advise you...that's what you pay him for.