(Topic ID: 296273)

Wanted: Jurassic Park Airball Deflector

By CryptKeeperAUS

3 months ago



Topic Stats

  • 8 posts
  • 4 Pinsiders participating
  • Latest reply 3 months ago by arakissun
  • No one calls this topic a favorite

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    View topic image gallery

    20210708_071645 (resized).jpg
    20210708_071639 (resized).jpg
    20210708_071753 (resized).jpg
    20210708_071734 (resized).jpg
    DSCN3614_Circle (resized).jpg

    This topic is linked to a classified ad.

    The Marketplace Ad Listing this topic was linked to has ended.

    #1 3 months ago

    ARCHIVED

    Archived ad

    Pinside keeps a record of old ads in its Market Archive, for historical purposes and as a price reference. This ad has been ended by its seller and is now archived.



    wanted

    Wanted: Jurassic Park Airball Deflector

    Added: July 5th, 2021 Ended: July 13th, 2021

    Price

    Wanted

    Item description

    Looking for this obscure steel airball deflector from a DE Jurassic Park. Located next to the control room scoop.


    Item photos

    No images have been added to this ad listing yet.



    Contact

    Note! This is an archived ad. No longer for sale!


    Listing result

    The seller marked this ad as "not sold". The item did not sell through Pinside so there's no listing result.

    Item location

    Perth, WA, AU


    Seller insights

    These are CryptKeeperAUS's all time market stats.

    All ads

    0
    0

    Archived ads

    0
    0

    Success

    0
    0

    Feedback score

    0
    N/A

    Go to CryptKeeperAUS's stats page



    #2 3 months ago

    Unfortunately, I do not have the part that you are seeking, but I have included a photo of the sought after part for your thread.

    Gord

    DSCN3614_Circle (resized).jpg

    #3 3 months ago

    I pared two machines so I must have this,but need pic of the whole part.

    #4 3 months ago
    Quoted from GRB1959:

    Unfortunately, I do not have the part that you are seeking, but I have included a photo of the sought after part for your thread.
    Gord
    [quoted image]

    Thanks Gord. That's the one. In my clean up of the cab I found the other half that had snapped off.

    #5 3 months ago
    Quoted from arakissun:

    I pared two machines so I must have this,but need pic of the whole part.

    Hi there,

    I have added a close up photo of the part. I am also looking for the Raptor lane ball guides. Left and Right sides.

    Thanks

    Steve

    20210708_071639 (resized).jpg20210708_071645 (resized).jpg20210708_071734 (resized).jpg20210708_071753 (resized).jpg
    #6 3 months ago

    Did evaporust do anything to clean up your ball guides? What about fine steel wool or very high count sound paper? Like 0000 wool and then working up from 8k to 15k sand paper. Those parts look bad but appear to be intact for the most part

    #7 3 months ago
    Quoted from ypurchn:

    Did evaporust do anything to clean up your ball guides? What about fine steel wool or very high count sound paper? Like 0000 wool and then working up from 8k to 15k sand paper. Those parts look bad but appear to be intact for the most part

    Thanks for the advice but the foundations are actually snapped on those lane guides with an existing bad repair on one already. I plan on getting them welded locally if I can't source a set. I use autosol polish to bring up the metal parts. Good thing about these old machines is you can bring anything back to new (or close too) with some elbow grease!

    #8 3 months ago

    Send you a PM.

    This topic is linked to a classified ad.

    The Marketplace Ad Listing this topic was linked to has ended.

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside