Looking for the piece that has a bakelite section for the fingers that hold the contacts which has the metal plate that gets pulled to the coil. Don`t know the name of the piece but maybe someone here could inform me.
You're currently viewing posts by Pinsider TK2012.
Click here to go back to viewing the entire thread.
Looking for the piece that has a bakelite section for the fingers that hold the contacts which has the metal plate that gets pulled to the coil. Don`t know the name of the piece but maybe someone here could inform me.
It`s like a Gottlieb 8-Slot E/M Armatures with Insulated Arms but not plastic. There are bakelite insulated arms.
The bakelite just fell apart, I`m showing another one to get a picture not the one that broke so you can see it.
I`m going to try to rig a Gottlieb piece on to the plate and see if that will work. Glue would not hold. Does anyone have one of these games?
Im going with the rivet on the exiting metal piece. Still looking for the same relay set up if this doesn
t work out.
You're currently viewing posts by Pinsider TK2012.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/wanted-coil-assembly-for-a-1956-genco-circus?tu=TK2012 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.