VUK go off by it self on my fish tales any ideas?.im Kind of a noob
You're currently viewing posts by Pinsider Metzu.
Click here to go back to viewing the entire thread.
Quoted from DanQverymuch:Have you Q tipped the receive opto? Else, if no wires have broken off the optos, try reflowing their solder pads. Otherwise the transmitter is usually shot.
Thank you!
do you have any pic on how to spotte it/do it?
Quoted from DanQverymuch:Two tiny boards mounted to the VUK underneath. I'm assuming, I don't have a FT. (So sorry, no photos either.) They'd each have two wires, all four going to one connector. Make sure that connector is tight, and the boards themselves, if one's loose they won't line up and the game will think there's a ball in there.
There'd be only one component on each board, LED shaped, those are the optos. Clean em, if that doesn't do it just reheat the solder where they attach to the board, the clunking of the solenoid often fractures a solder joint. If still no go the transmit LED (clear one) probably needs replacing, you could change the LED or the whole board, it's cheap. If you can't see it glowing it ought to show up brightly on a cell phone camera if it's working. If it's not dark but dim that'd still be why things aren't working. Might want to replace the receiver too, apparently modern replacements and old ones don't always play nice.
thank you!
ill check for that ill take a couple of pics and ill post them
Quoted from DanQverymuch:Hang on a minute, I was so transfixed on the contacts that I didn't even look at the paddle(?)!
Looks stuck down to me, I don't see where it could ever go more down!
Is the one side bent and wedged in? Probably because that rubber(?) thing on the end of the solenoid's plunger does not match the manual drawing.
That switch is only supposed to close when a ball is resting on it.
Oh no what does that means? How can i do to fix it?
Quoted from Metzu:Oh no what does that means? How can i do to fix it?
I fix it thanks to you!!!
Quoted from DanQverymuch:Great! I assume you bent that paddle back where it belonged. Good for a quick fix, but you may want to eventually get the correct part for a permanent fix.
The correct part? What you mean there should be the opto thing? Do they changed the mechanism?
Quoted from Pinballomatic:No, sir he's talking about the ball cup that rides on the top of the plunger (see the exploded view drawing). You don't put in an opto but if the cup part is interfering with the switch blade you should order the correct cup for the ball to rest on.</blockquote
Thank you pinballomatic i still dont see it can you mark it for me please?
Quoted from DanQverymuch:Why do I get the feeling he's "not gonna fix it if it ain't broke"?
Good team effort, though, everyone! Helping out someone with their pin, somewhere in the world, we don't even know where!
Im from argentina not easy to get parts here
You're currently viewing posts by Pinsider Metzu.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/vuk-go-off-by-it-self?tu=Metzu and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.