Quoted from ShootForSlrValue:Could anyone shed some light on how to prevent side to side motion on the rotisserie? Mine is not stable whatsoever. It’s not the rotation that’s the problem but the two poles that hold the angled brackets.[quoted image]
I had the same issue. So I bought four 3/4”x12” pipe. Bought a 3/4” cross, and a 3/4” x 1/2” tee. The tee is 3/4” top and bottom, and 1/2”. Also need a 1/2”x60” pipe.
I removed the two 36” vertical pipes. On one side I put the 12” vertical pipe, then the 3/4x3/4x1/2 tee, then another 12” pipe. The other side a 12” pipe, 3/4” cross (I put in a tee screw) and another 12” pipe. Then thread in the 1/2”x60” pipe, tighten the tee screw. Very solid
2BF2A77E-F859-4194-A27A-AF5CFB0DF7D8 (resized).jpeg2CB35940-D561-49E9-BE66-6313B9309462 (resized).jpeg