Another successful 30 minute rotisserie build. Under $200 total at Lowes. Thanks to all contributors.
You're currently viewing posts by Pinsider jazc4.
Click here to go back to viewing the entire thread.
Another successful 30 minute rotisserie build. Under $200 total at Lowes. Thanks to all contributors.
Quoted from bitCurrier:I have all the materials to make this except I'm not easily locating the sillcock handle. I even called some plumbers supply stores. Is this the Lowe's item #133575 that you used to procure the handle? http://www.lowes.com/pd_133575-33599-M72AS-HASK_4294700944__?productId=3389482
Other than that, Ace Hardware seems to have some, but only if it is delivered to my local store and I'm not even sure if the handle has a square slot on the other side for the carriage bolt, so I don't know if I even want to try that out.
I got this one because it was all my Lowes had. It works but I need to epoxy it to the carriage bolt. Otherwise, I have to hold it on the square aligner to use it. Probably worth a trip to HD if they have a better one. My Lowes is 3 miles away and HD is 15 miles, so I'll try epoxy first.
Post edited by jazc4: Forgot link
Quoted from DadofTwins:Love this thread! Was thinking about building one myself. Looks like it's a go. Thanks!
Do it. It was much easier than I anticipated, especially drilling the holes and tapping them. I don't have a vise or drill press, so I put the 36" pipe into the Tees before I drilled to stabilize them. Worked great.
You're currently viewing posts by Pinsider jazc4.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/vids-quick-and-dirty-rotisserie-guide?tu=jazc4 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.