Black Knight
Williams, 1980
Indiana Jones: The Pinball Adventure
Williams, 1993You're currently viewing posts by Pinsider monkeyboypaul.
Click here to go back to viewing the entire thread.
Howdy,
Trying to replace the flipper bushings on an Addam's Family, but they appear to be stuck fast to the flipper base plate... Any suggestions?
Have removed the bolts underneath, but screws are not turning - various screw drivers are just ruining the screw posi/Philips head...
Cheers.
Quoted from vid1900:So you removed the lock-nuts from the backside of the plate, and now the screws will still not turn CCW?
Heat the screws up with a big solder gun or micro torch - someone may have used Loc-Tite on them.
Turn the now ruined screws with a pair of Vice-Grips187470-i.jpg 39 KB
Hello,
Yes, locknuts removed ok, but screws not turning and ruining the heads. Haven't tried vice grips on them, may give that a go.
Thanks.
You're currently viewing posts by Pinsider monkeyboypaul.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/vids-guide-to-upgradingrebuilding-flippers?tu=monkeyboypaul and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Vista, CA