Thanks again Vid! I just did this on my WW using the new style springs and there's a huge difference in flipper feel and play.
You're currently viewing posts by Pinsider dmacy.
Click here to go back to viewing the entire thread.
Yes, the metal still has a "bite" on it. You can gently tap on it from the underside with a hammer and have your other hand on the top side ready to catch it so you don't scratch up the PF.
Stupid question but figured I should ask: Fliptronics flippers. Does the EOS care where the orange and black wires are? Obviously not together but the switch just needs see a make and break or am I way off?
Quoted from RussMyers:Doesn't matter for that appplication.
Closing that switch is just like touching the wires together - doesn't matter what leaf side it's attached to.
RussMyers
Thanks Russ. I really figured that but figured it was worth the stupid question to hopefully save someone else. I actually had searched it so many times and usually just match wiring.
Quoted from rottenrobert1313:Well I picked up a SWE1 and I'm on to the flippers. This is my first machine and I'm learning as I go. I have a question and I have read every post but I still might have missed it.
I'm going to start my flipper rebuild and I noticed that mine don't have the capacitors. I looked in the manual and didn't see one listed. So....should I put the capacitors on ? If so how do I wire them up since it don't have any to begin with?
Thanks in advance
No capacitors needed on that generation. I believe Williams Fliptronic and newer no longer need capacitors for flippers.
Quoted from Whysnow:Also I noticed my left flipper button is a leaf switch and right is opto style on RS, is this normal?
FWIW, I have opto's on both sides of my RS...
You're currently viewing posts by Pinsider dmacy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/vids-guide-to-upgradingrebuilding-flippers?tu=dmacy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.