Quoted from Curbfeeler:I am in the process of rebuilding my pinbot per Vid's guide here. if you wait a couple days I will post the result and parts list. Pinbot is special and needs full frames, since the switch bracket doesn't have a place to drill.
As promised, here is my parts list from Pinball Life. This is for Pinbot and should be everything you need. I replaced everything but the non-impact side of the coil bracket and one low voltage switch (both marked in red).
IMG_4349.JPG
Everything else goes. The reason I had to get new WPC bases is Pinbot didn't have the capacitor so there's nothing above the switch to attach the spring to. I could have fabricated something, but for $20 shipped I'd rather have something I know will work.
Keep in mind I didn't know about the bases until I'd bought everything else, so likely I could have saved by buying a complete kit. Live and learn.
Of course you could replace your low voltage switches, but I can't imagine you need to. Those just tell the CPU that the flippers were pressed via the switch matrix so the lane lights can alternate. they are prob used for high scores also, but not sure.
Hope this helps fellow pinbotters.
+++++++++++++++++++++++++++++++++++++++++++++++
Williams Logo Flipper Bat And Shaft Assembly
pbl_20-9250-5_20-9250-6
Options:
Choose A Color : White $4.95
(Not Taxable) 2 $9.90
1-1/2" Standard Size Translucent High Gloss Super-Bands™ Flipper Rubber
pbl_23-6519-xx
Options:
Choose A Color : Red $1.95
(Not Taxable) 1 $1.95
1-1/2" Standard Size Translucent High Gloss Super-Bands™ Flipper Rubber
pbl_23-6519-xx
Options:
Choose A Color : Blue
Williams/Bally Flipper Rebuild Kit - 02/1992 to 04/1993
pbl_0292-0493
Options:
What Do You Need? : Full Kit $21.50
(Not Taxable) 1 $21.50
Williams/Bally Nylon Flipper Bushing
pbl_03-7568 $0.85
(Not Taxable) 2 $1.70
Williams/Bally End Of Stroke Switch - Normally Closed
pbl_03-7811 $2.75
(Not Taxable) 2 $5.50
Williams/Bally Rubber Bumper Plug/Grommet
pbl_23-6577 $0.65
(Not Taxable) 2 $1.30
Williams/Bally Left Staked Flipper Base Sub Assembly
pbl_C-16103-L $9.25
(Not Taxable) 1 $9.25
Williams/Bally Right Staked Flipper Base Sub Assembly
pbl_C-16103-R $9.25
(Not Taxable) 1 $9.25
Williams SFL-23-600/30-2600 Flipper Coil
pbl_SFL-23-600/30-2600_coil $11.25
(Not Taxable) 2 $22.50
IMG_4346.JPG