I have a couple questions about the general order in which the playfield restoration/clear coat process takes place. This is a great guide, but I may have missed the actual order somewhere.
Assuming there's nothing terrible wrong, is this correct? What are the wait times as noted below:
Remove Mylar
Clean playfield w/ Naptha/rag (this is done before each coat. I left it off to be concise.)
Hit playfield with magic eraser/alcohol
Fill in cupped inserts
Hit with 800 grit sandpaper to get tooth
Apply light coat of clear to seal stuff (does this count as 1st coat? Do I need to allow cure time?)
Do paint touch ups/decals
Apply clear coat 1 (how long to wait before sanding/applying 2nd coat?)
Remove hills with 120 grit, then 220,...
Sand 1st coat with 800
Apply clear coat 2 (how long to wait before sanding/applying 3nd coat?)
Sand 2nd coat with 800
-Do I need to wait a couple weeks/month here to let stuff cure before applying 3rd coat?-
Apply 3rd coat (do I sand before/after it has cured for a few weeks/month?)
Sand with 800
Sand with 1000
Sand with 1500
Sand with 2000
Buff w/:
Medium Cut
Swirl Remover 2.0
Machine Glaze
Blitz Wax
Thank you for the help/clarification.