Will be starting my F-14 clear coat following this thread. PF is NOS and has nice flat inserts. I will be putting the epoxy suggested on the back of inserts to give them a good hold. Then lightly sanding the pf with 800.
You're currently viewing posts by Pinsider heni1977.
Click here to go back to viewing the entire thread.
Quoted from vid1900:Ask your woman to help, they have much better color vision and have names for colors you never knew existed.
That's the truth!!!!
Wow, that is a serious undertaking! Just FYI there is a hard top for that one. Not trying to sway you at all. Just a suggestion.
Start from post#290 in this thread. Should help with your question.
Starting a new learning experience following this guide. I have a beat up Bally Star Trek that I got pretty cheap to do this with. So I can damaged with out to much loss. And if it looks good I will hang it on the wall.
Going to start by re reading this thread!!!!!
Then ask a ton of question's!
And then some more question's!
Last night I removed rails, and fish shank screws. Need to remove roll overs and inserts next.
Ordered frisket,exacto, and createx paint.
I will sand shooter lane and any bare wood.
First question, should I sand any of the pf?
It was sanded at some point in its life and looks to have some rubbing done to it.
What do you think I should do?
Knocked out inserts they are special colors for some reason and some were raised.
Few issues
Lost some wood, what filler should I use?
Lost 1 insert, how to fix this
And how should I clean these inserts?
As always help is appreciated!!!
No not lost, should of said broke
Wow glad I only broke one then.
Will clean those up and get them re installed. Shooter lane still needs some work.
I don’t know what happened to this pf but it has taken a beating. Glad this is a learning pf!!!!!!!!
I followed that instruction, I think I over heated it and caused it to break.
Once again I am glad this is a pf I got to learn on!!!
You're currently viewing posts by Pinsider heni1977.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/vids-guide-to-ultimate-playfield-restoration?tu=heni1977 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.