Another Vid thread to stick in my favorites folder! Thanks! As a happy new owner of a Blackout will be following this one closely.
You're currently viewing posts by Pinsider zippydapinhead.
Click here to go back to viewing the entire thread.
Another Vid thread to stick in my favorites folder! Thanks! As a happy new owner of a Blackout will be following this one closely.
Quoted from vid1900:Next section will be Sys6 power supply.
Important note to novices ( just learned this the hard way )
Couldn't wait for Vid's power supply tutorial and just recapped my system 7 board.
OBSERVE POLARITY!
The first couple caps I pulled off the board had a very prominant + sign on the black stripe, so I assumed that was industry standard and installed all the new caps on the board with the black stripe to the + solder pads. Call it a rookie error, but all the new caps have the black stripe on the - side. Needless to say, when I plugged it back in it didn't work and I hope I didn't f%#k anything up. Was only powered on for a second, got a strange hum and I switched it right off with no visible damage done. Now have to desolder all those caps.
Anyway - polarity!
And Vid, keep the tutorials coming, you da man!
Quoted from zippydapinhead:Important note to novices ( just learned this the hard way )OBSERVE POLARITY!
Here's a pic of how NOT to re-cap a power supply. (and not to do board work late at night)
Quoted from Patofnaud:Welp, they got some in right. Don't that count?
Nope, that C5 in the pic, I already flipped, it was wrong too.
You're currently viewing posts by Pinsider zippydapinhead.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/vids-guide-to-bulletproofing-williams-system-6?tu=zippydapinhead and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.