I am working through this post on a High Speed that has sat for quite some time. Before and after replacing caps, I am getting 12v on the 5v test point. I think the transistor is bad. Have a new one on the way.
I assume the high voltage changes apply to system 11, as well. My problem is the component layout is slightly different from the image on page 2 of this post. I am not able to find a component layout for the System 11 power board. Can someone point out the resistor and diode numbers or point me to an image with the components labeled?
C5151D0F-4274-46A3-943C-745B16C7FEC7 (resized).jpeg