All I know is that I barely touched my board and it fried the 5101 ram chip, so I recommend replacing it. I used the pinitech NVRAM product and it worked great!
You're currently viewing posts by Pinsider chrispink25.
Click here to go back to viewing the entire thread.
All I know is that I barely touched my board and it fried the 5101 ram chip, so I recommend replacing it. I used the pinitech NVRAM product and it worked great!
Quoted from zug1619:Slochar, Rich, Peter and Flashball,
Thank you all for the quick feedback. All this info is gonna make it so much easier for me!
Question on the Bridge Board. It says it replaces the large Cap as well as fusing the 18v and 32 volt soldnoid circuits.
My plan is do the caps and all other upgrades on the Power Supply Board according to Vid and Clay's guides. What Cap is 6C1? Is that one of the caps on the power board or is it a different cap?
Think i'll order one from Bid Daddy and get this show started
Dan the Painter
It does not replace the caps on the power supply board, just the super large cap in the backbox.
You're currently viewing posts by Pinsider chrispink25.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/vids-guide-to-bulletproofing-williams-system-6?tu=chrispink25 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.