I could use a little help with a switch issue. My 7/8 rollerover at the top of Laser Ball isn't working and looking at the matrix, some other switches in the row are working, and others are not. This is all on the white/blue wire, which is switch 14 (middle left side standup) which is not working, 22 (E drop target) not working, 30 (7/8 rollover) not working, 38 (BALL drop target series complete) undecided but I think it's not working, 46 (right jet bumper) WORKING, and 54 (5 star rollover) not working.
I have inspected each switch and none of the wires have broken free. If the picture of the matrix is correct and the "5" rollover is the last one in the line, that would make sense because it has a single wire, and seems to be the end of the daisy chain. Maybe that's the case, maybe not. Either way, with a switch in the middle of the chain working I don't know it's a wiring issue.
Sort of out of guesses, so any thoughts would be welcome.laserballswitcherror (resized).JPG