Got my Pinduino board assembled last night. Everything went together nice, smooth, and quickly. The instructions that Eric put together were great. Only thing I did a little different was socket the 4 optoisolator chips.

Looking forward to playing around and testing it out this weekend. This is my first Ardunio project, so I'm still learning the ropes...

I hooked up the Pinduino to my F-14. I'm still messing around with it and trying different effects now that it's in the machine. Eric has been great answering questions and helping with suggestions.
It's not as cool as some of the stuff Eric and you other guys have done, but I think it's a good start. I have LED strips on the sides of the shooter lane and the apron area.

Continuing to have fun testing an re-configuring the Pinduino setup on my F-14.

I now have addressable LED strips on the sides of the playfield, apron, diverter, and radar scope. Put an updated, revision 2, video on YouTube.

*Update: I also put strips under the cabinet for an all around lighting effect. Here's a link to a basic install overview/guide I put together based on Eric's other guides.

https://drive.google.com/file/d/0B4v11BwvP9WodWZ4RWVuVldZd2c/view?usp=sharing

I don't think so. Same kit should work for WPC games. Eric has installed it on TAF and TOM.

https://drive.google.com/open?id=1AILkBQkR4-VTdYEEuH_BTGi2seYsod-aqP9rHbFgXhY

https://drive.google.com/open?id=1HKyJwPsHfhxWkHS7zmrljCiCwN6ou_A6P5EYyhbwRRM

Yes, same harness. The connector might have more pins than what's on the wpc board, you can just offset it.

For example system 11 board has 9 pins, but the connector in the kit has 10

Offset_Connector.jpg

Glad to hear this! Thanks Eric

I like it Eric, nicely done.

Pinduino power!

Excellent! I will mess with it this weekend and see what tweaks I can do to F-14...