Good morning,

Highly interesting and flexible mod, but I would have a few questions:

- Do WS2812b ledstrip with integrated silicon diffuser exist somewhere ? I really don't like too much seeing the ledstrip as is on a pinball machine in off mode, or when the lights are off, and these ledstrips are visible when mounted on ramps

Otherwise the effects are really really neat, especially on ramps (like Tron)

- Why the limitation to two outputs only ? I understand you can drive a lot of led through a single output, but that makes programming rather complicated (if you want ramps, backbox, apron, undercab, etc). For example, for my virtual pinball I use a Wemos D1 Pro, it has 6 outputs, which I use to drive independently left and right playfield ledstrip, led backboard and undercab. Unless I'm missing something ?

- Are the ledstrip used 60 led / m ?

Regards

[EDIT] Found answers to all my questions by reading through multiple threads.

I might be missing something, but... Where has the store gone?? I wanted to order a few kits...

Cheers and happy new year

Good morning,

I'm release as open source my Tron disc mod design information

Video of the mod:

Github of the mod: https://github.com/Ashram56/Tron-Pinball-Disc-Mod

Note the licence: this is GPL3, free to use and free for commercial usage, but you are required to give credit, and to release any change (both HW and SW) made to the design publicly, ideally as a commit or a fork of my github.

I'm posting here as well since I designed my own control board, but since it's clumsy I thought that Pinduino is actually better to use. I did not write the code yet for Pinduino though, nor did I mount it in my Tron (really need to do it...), so if anyone want to do that, feel free (just requesting the code to be made available on my github)

Questions, feel free to ask