Anyone have mirror blades pics?
You're currently viewing posts by Pinsider mbott1701.
Click here to go back to viewing the entire thread.
Quoted from Sciddleybop1980:It’s a great game. Really really great. It’s got that “one more game” thing going on like no other pin I’ve owned.
Yes, this ^^ 100% for me too.
Quoted from finnflash:I guess the pro does not have the ball trap plastic.
I ordered the parts from Pinball Life. The plastic ball trap piece I got isn't quite the same as PinMonk posted. I was able to make it work though.
686DCC57-5237-4106-AEEF-5AA41D0B506D (resized).jpg1C10DACB-74EC-4919-AB14-AC6BEDB850AB (resized).jpgAB5D13A7-C333-4A0B-A34A-F845D373EC37 (resized).jpg Added over 5 years ago:Install kit: https://www.pinballlife.com/iron-maiden-peace-of-mind-eddie-plastic-kit.html
I had to email Terry to get the ball trap kit ordered, I'm not sure if it's something they plan to stock regularly.
Quoted from finnflash:I don't see the plastic ball trap peice on pinball life. Would anyone else sell it?
FYI, The Piece of Mind Eddie install kit is now listed on Pinball Life.
https://www.pinballlife.com/iron-maiden-peace-of-mind-eddie-plastic-kit.html
Quoted from PinMonk:Done. Paypal invoices will go out late next week and shipping will start the week after.
They are the same for all models, right? I don't think I specified game model in the interest thread.
Quoted from pinnyheadhead:Can I ask you or anyone else for a link where one could check these out? I am not a big modder. Thanks
https://pinside.com/pinball/forum/topic/iron-maiden-colored-mode-lens-tree-mod/
Quoted from Bohdi:What are the must have mods ...?
I'd say definitely the colored inserts that PinMonk sells.
https://pinside.com/pinball/forum/topic/iron-maiden-colored-mode-lens-tree-mod/page/6#post-4878886
Quoted from Bohdi:Side art blades vs side mirrors too is what I can't decide??
I'm in the same boat. I like mirror blades, but I'm leaning towards the Stern art blades for this one.
You might be suffering from the weakening flipper strength issue. I seem to have that with my machine too.
https://pinside.com/pinball/forum/topic/stern-flipper-weakness
I replaced coil stops, plungers, coil sleeves, adjusted eos, flipper switch, but they still seem to get weaker the more consecutive games I play.
Quoted from dsuperbee:Those are like gold, and I do have an extra, but I'm worried it's so close to the flipper it will break in short order.
I'm more than willing to drill my pf to make the prem. version work. Just need a premium and or Le manual to see the part numbers to order
https://sternpinball.com/wp-content/uploads/2019/03/IronMaiden_LE_Pre_web.pdf
page 50
Quoted from parsonsaj:I have an odd problem with my Pro since this weekend's work on it. After installing a Laseriffic topper and putting in a clear shooter lane protector, I have 2 new behaviors that I suspect have a common cause (though I don't know what that cause could be!):
1) The ability to pick the song using the flipper buttons persists until well after the ball has been launched and points have been scored. Previously, once any switch had been contacted hitting the flipper button would not change the song selection.
2) The autolaunch is slow to launch balls whenever there is a multiball started. The ball will just sit there in the shooter lane for a couple of seconds now before being launched. Previously it was almost instantaneous whenever there was a need for a ball to be autoplunged.
Anyone have any ideas what could be causing this new behavior? The game works perfectly fine otherwise and Lord knows I'm getting a lot of games in on it.
Yes, you'll have to adjust the switch by bending the actuator. I had to do that to mine when I installed the protector.
The issue of the auto launch balls not making it around the outer loop came back once I installed it, too. I'm thinking about removing the protector.
Quoted from djreddog:My right flipper coil stop just bit the dust.
It's time has come.
I noticed this on my game too. I replaced the coil, sleeve, plunger, coil stop and eos switch. I also had a broken eos switch on the upper right flipper that I replaced. Seems better now after doing all that.
Quoted from estrader:What is the auto launch coil change? Is there a link?
https://pinside.com/pinball/forum/topic/iron-maiden-issues/page/35#post-4806866
Quoted from mollyspub:Has anyone installed Mezel Mods clear shooter lane protector ? Seems like a good idea.
I did, but didn’t like it and removed it. I had my shooter lane dialed in as far as auto launch making it around the loop. After I installed the protector auto launch was hitting the post sleeve again about 50%.
Quoted from PinMonk:Super easy, barely an inconvenience.
Switching out led boards is tight!
Quoted from JFink8222:For anyone who has mounted a Spitfire, where did you mount it and what did you use to mount it? Got a nice die cast replica and want to mount it on top of one of the rails and am looking for suggestions on how some did theirs. Thanks!
Here's how I mounted mine.
https://pinside.com/pinball/forum/topic/iron-maiden-mod-thread/page/15#post-4880956
Quoted from Yfichelle:How do you have contacted stern ? I have asked on the stern website... No answer
With facebook messenger... No answer....
Thanks,
Yannick
Quoted from pickleric:Email [email protected] with your serial number.
The protector to protect the orbit drop off from the center ramp is part number: 502-7087-00
It works well. Easy to install.
Anyone notice a change in the shaker motor since the update? I have a pro and since I did the update it seems the shaker doesn't activate as much. For example It used to shake when collecting score at the end of ball, but not longer does it. I have the setting enabled to maximum.
Quoted from Bohdi:Thanks! Anyone confirm these are the correct ones??
Yes, those worked fine for me.
Quoted from craif:Added the premium eddie sculpts to my pro. Like them, but they seem a little dim compared to the clear stand ups they replaced. Anyone tried adding an led somewhere to spotlight them?
I put a spot on my piece of mind Eddie.
https://pinside.com/pinball/forum/topic/iron-maiden-mod-thread/page/15#post-4882510
Quoted from bowtech:Anyone instal the the mezel mods shooter lane protector? I am having an issue with the switch not registering with it installed and do not see a way to adjust the switch like in the self help video due to its style. Also have 2 extra pieces with tape on them with not idea where they go.
I had the same issue. Didn’t like the thing so I removed it, added some Mylar and reduced coil power. Should’ve done that first and saved myself some time and money.
You're currently viewing posts by Pinsider mbott1701.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/up-the-irons-the-iron-maiden-pinball-official-owners-club?tu=mbott1701 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.