Had the same issue with one of my up posts (nearest sarcophagus) The black sleeve would slide up and not return all the way.

Fortunately it’s easy to fix. When I talked to Stern they advised-
3 wood screws to remove the mech,

remove the rubber and wipe down the metal rod,

Optional to use some epoxy and slide it back on (if using epoxy let it dry before playing),

Reattach with 3 screws.

Has played great since

546EBFE7-9786-4985-AA5E-580864AA1563 (resized).jpeg

0170543D-0C73-4500-84F2-9D6AE5700791 (resized).jpeg

30A949DA-925A-4455-9A37-ED5A595DBFA0 (resized).jpeg

972292A5-32FB-4151-8D18-BC72FF4B949E (resized).jpeg

Newton ball orb help.

The mechanism when hit moves as intended (pin is the newer version) but doesn’t result in any movement of the white saucer/connection arm underneath the play field.

Ive tested the switches and when they connect they work as intended.

Tried adjusting the switch so close the shaker and bumpers would set it off but not the actual hit still.

Any help is appreciated.

Thanks
EricKong

It’s connected. Both the ball and spike can rotate still and when the ball is hit the spike moves to the outside of the white saucer- but that’s the end of the motion - the impact on the saucer isn’t enough to move the connection arm at all.

Ty for the help