Bristol, TN
Just recently joined. One of my all time favorite pins.
(Topic ID: 213089)
Linked Games
Iron Maiden: Legacy of the Beast (LE)
Stern, 2018-
Iron Maiden: Legacy of the Beast (Premium)
Stern, 2018
-
Iron Maiden: Legacy of the Beast (Pro)
Stern, 2018
Topic Gallery
You're currently viewing posts by Pinsider aflacjack.
Click here to go back to viewing the entire thread.
1 year later
I designed this mod for my Iron Maiden and wanted to get you guy’s feedback? I used green, but can do it in white, red, blue, and purple as well. Thanks and let me know good or bad.
0A0F7B47-9583-430C-9EF1-5DED5258D4D5 (resized).jpeg16EAB146-52FB-4449-AE01-F6511EED5C72 (resized).jpeg8C17AA8B-0442-4788-8181-3772408E7417 (resized).jpegAE72086B-7350-419B-BC6D-97DC2DA2E3FF (resized).jpeg
Added over 4 years ago: Note.....Part of an existing 3d print that I changed a bit and added a light to that works of the Gi. My apologies as my use of the word “design” was open for interpretations not intended. My use of the word design was to reference that I haven’t seen a toy like this in an Iron Maiden machine. I should have used the word “made”. Hope this clarifies.
Quoted from DanieB:I love the mod!! Can you tell me a bit more about it
It is made out of gold colored material and has the eye open for the light to shine through. Connects to the Gi and was super easy to install. Thinking about making more if people are interested.
Quoted from mattosborn:Why would you design it to be the Illuminati pyramid? That doesn’t make any sense....
Is that what you think it is? Just wow. It is just a pyramid(as pyramids are a part of the theme) and I wanted something light could shine through. It is known as a hieroglyphics eye, not something sinister.
Quoted from mattosborn:Well, clearly this is something you found (not “designed”), as you don’t know what it is. See the “MDCCLXXVI” at the bottom? This is the pyramid depicted on the back of the US $1 bill, often referred to as the “Illuminati pyramid”.
You’re not a fan. Got it. Thanks.
Quoted from WJxxxx:You posted your mod, which you 'designed', (PS finding some cheap tat off Amazon and sticking LEDs in it doesn't really count as designing something).
Someone asked why you 'designed' the Illuminati pyramid.
You didn't even know that's is what you 'designed' and came back with snarky comments.
When it was then pointed out again you come up with another snarky comment.
FWIW, as you asked for feedback 'good or bad' - I think the placement is completely wrong, it doesn't match the theme and looks cheap.
Ok. That is not what I did, but whatever. Post fixed now, and thanks for the feedback. Maybe we can all be friends again in the pinball universe? Not fueling a negative fire doesn’t constitute being snarky, FYI. Enjoy your day!
1 month later
Quoted from mettle64:I'd love to see some photos once it's in the machine and backlit! I'm doing a retheme as well and haven't pulled the trigger on a translite yet.
I’ll post some tonight
https://pinside.com/pinball/forum/topic/introducing-pinball-mix-your-music-in-your-machine
I used him. He does a great job and will incorporate any music that you want. The beauty of it is that it is put on an SD card and can be put back stock in 3 seconds. Different queen music is blended into the code just like stock. For example. When aces high begins, the music is “One vision”
Quoted from Bmanpin:Does anyone have experience here with the black Pinball that says “Eddie Lives” on it? Recommended or
No?
I have 3 of them. Neat look but they seem to be just a tad lighter and play differently. I did keep 1 in just to mix it up
Quoted from snappahead:Yours is really loaded! Are you happy with all of your mods? Any one or two you'd recommend most? The Orb mod seems like a safe bet.
I honestly love them all. The archway, , sarcophagus, and orb mod are great, and I am partial to the pyramid I made as well. On my machine it breaks up the feel since most of my mods are on the right.
5 months later
Shout out to Mancave for the awesome flipper toppers. Great price, shipped immediately, and got them from Australia faster than lots of domestic shippers. I love them. Thanks sir!
873841BA-F28D-45DB-9772-0D9C68778AE9 (resized).jpeg89B0A7A4-92EB-4E1B-BB92-357F02187533 (resized).jpeg9C60E922-63BA-4DFB-B19F-EFEF2AA8DECA (resized).jpegEA7AF060-064C-4FC7-8C7B-716820182F2B (resized).jpeg 4 months later
1 week later
Quoted from Snugs:Newbie question...the "orb" on my Pro has come apart. The screw that attaches that goes thru the Orb came off. Nut that held it together came off too (well...came off first). Wondering if it shook loose as I added a shaker motor thats sorta violent but...what's the tool needed to tighten the nut and get the Orb back into place? Tried to use a Phillips head to tighten the screw while I tried to hold/secure the nut but thats not working well. Do I need to pull the playfield out to fix or is there a tool that will fit so I can reattach from the bottom/underneath so I only need to remove the glass???
Hold the nut with your fingers and get it started. Then to tighten I used a wrench to hold it while I tightened with a phillips.
7 months later
Quoted from Mancave:I spy some 3D flipper toppers
//<![CDATA[
window.__mirage2 = {petok:"52918badf5743dcf978ee6adc97eb620e621a974-1633068463-1800"};
//]]>
They are attached to the flippers I removed. I will put them on tomorrow. Good eye!Still have the lower one's attached, little hard to tell?
1 year later
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider aflacjack.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
