You're currently viewing posts by Pinsider QuarterGrabber.
Click here to go back to viewing the entire thread.
Speaking about the artwork. I have not owned a new Stern machine since The Walking Dead. Sterns artwork has always been kind of bland and cut and paste. I picked up an Iron Maiden and wow the artwork is just stunning. I can't believe the Drastic change in art from that time period to now
Quoted from Gogdog:Yeah...plenty of new stern playfields suck. This one is so good because its from zombie yeti. He also did Ghostbusters and Deadpool, and I think magic girl. All of them awesome art. Wish they would pay him to do more of their PFs!
Nice! Why doesn't stern use this zombie yeti guy for every playfield? What else has he done for stern?
Quoted from mollyspub:Your shopping this out already?
Yes complete shop job. It seems it was heavily routed for about a year and went into a home where it wasn't shopped for the next year. When I received it it look like someone took a bag of coil dust and dumped it over the whole machine. I mean black dust everywhere, in the cabinet even in the back box. I had to strip everything and completely clean the black dust off of everything. I actually thought it caught fire, LOL. I asked about it on pinside and apparently black rubbers cause this? Upon the teardown I noticed the Playfield was a defective one right from the factory and had a big wear spot right to the wood. But that is another issue. I did touch up the wear spot but you can clearly see it in the picture
Quoted from KnockerPTSD:Didnt even have the playfield up but spotted all this gold. I'm rich!!!
Guess its about time for some stops. I.havent had any issues with gameplay...so far[quoted image]
[quoted image][quoted image]
Mine mine was the same. Stern uses really cheap flipper mechs now
Got this machine not too long ago and have a couple questions. How do you lite the revive? Also when I got the machine I went to update the code figuring that would be an update. Last update was over a year ago. I guess a year-and-a-half at this point. Do you think they will ever update the code again? Does it need anything? Or is it solid the way it is?
Do you recommend any changes in the settings? The only setting I changed so far as I put music to -5 so it is a bit louder. Everything else Factory so far. Any recommended changes to the settings?
Quoted from PinMonk:Thanks for the nice shout out.
The easiest card to go for is the mummy. Start mummy multiball then keep hitting the lane next to the captive ball with the spinner. Couple of those shots, hit the captive ball. Repeat that a few times and you'll have the card.
Do you have a website or a link to a website?
So I asked everybody on this thread what are the best mods to get for Iron Maiden. Most people said a subwoofer and a shaker. The subwoofer is huge add on for this! Thank you guys for recommending the sub. However the Shaker is useless. I bought the spike shaker from Stern and it barely shakes. I have it on maximal use and I can barely notice it. Beside a game like my iron man that has a red Tremor and is constantly going through the whole game, Iron Maiden seems to only go if you hit a jackpot. It barely shakes at all even when you do hit a jackpot it's a couple small turns. Very disappointed with the Shaker use in Iron Maiden. Hopefully they update that with a new update
Quoted from mattosborn:Something is wrong with your shaker.
It's a pretty easy install four screws and you plug it into that board on the side. I did everything the instructions say. It just barely moves. Not as much as the Iron Man beside it. My Iron Man Shaker is always going. My Iron Maiden Shaker seems to only go when you hit certain shots or jackpot and then it still doesn't go that much ? My powered subwoofer shakes the machine more than the Shaker does. Do you think it matters what direction the Shaker was mounted in whether those bars on the side swing in or outwards?
Quoted from Mancave:Ok, well you buggers convinced me to install a shaker motor so if the machine starts coming apart i'm posting out destruction bills to Y'all
Liking it so far although i think others comments are reasonably accurate, i feel the code needs a tweak for a bit more interaction. And yup, set on Maximal using a Pinball Life shaker.
yes! glad i am not the only one. not much shaker interaction at all. need more shaker in the next update
You're currently viewing posts by Pinsider QuarterGrabber.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/up-the-irons-the-iron-maiden-pinball-official-owners-club?tu=QuarterGrabber and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.