Quoted from Jason_Jehosaphat:

Pinball Life's "Upgrade Kit": How to Install?
https://www.pinballlife.com/iron-maiden-upgrade-kit.html
To those of you who have installed the above kit, please clue me in on just where the reflectors go. The kit comes with no instructions; buyers are instead advised to consult a photo - see below. It shows one reflector, mid-install, on one opto. Got it. Still, the kit comes with *two* reflectors. Does the second one go in a second opto that I'm overlooking? The one opto I see is on the elbow (upper right) of the loop.
Thanks.
[quoted image]

Quoted from Arcade:

Same here. Mode tree and fireball loop. Love em.

Quoted from IdahoRyan:

Pretty Stoked. Took delivery of my first NIB pin today.
Can't wait to open it and get it setup!
Plan to install a shaker motor and some Cliffys[quoted image]

Quoted from PinMonk:

Look in the "new" section. Here's a picture of the set. Email cliff to order one.
https://www.passionforpinball.com/WIP/IMDN-LE-Set-001.jpg

Quoted from PinMonk:

under the kickout at the top of the playfield (bottom if it's lifted). Find the switch that triggers there and look on the side of it for two small, long, thin screws. Often times, one comes loose and the switch swings away on the remaining screw's pivot point.

Quoted from darkryder:

I had the same issue on my LE. The ball was getting hung up on the micro switch. Had to remove the plastic mini passage from behind the backboard and adjust the switch. I can’t imagine what else it would be on yours, check the passage for ball obstructions and adjust the switch blade I’d necessary. The game progression really suffers when just one switch like that isn’t functioning correctly.

Quoted from RA77:

So cool for team Maiden to implement .........DJ Mixer..........
Thank you so much !
This pin will be bolted to the floor for all time.
" Beast Life "
Haha[quoted image][quoted image]