Quoted from Kkoss24:Found it
Isn't that the piece that guides the playfield on the side rails?
Quoted from Kkoss24:Found it
Isn't that the piece that guides the playfield on the side rails?
Question that I can’t find on the rule sheet, my friend only scored 71 million on his game but got the pharaoh bullseye record with 47 bullseyes! Does that mean he hit it up the centre ramp 47 times for 71 million points?
Edit: the bullseye switch was triggering with each left flipper hit. So can a high score for that feature only be removed? Without resetting all high scores?
Quoted from Anony:Isn't that the piece that guides the playfield on the side rails?
Does anyone sell a gadget to stop the playfield from slipping off the ends of the playfield rails? Has happened to me a couple times with my Sterns. Luckily no damage so far, but it is a real scary experience when the playfield comes off the rails. Cheers.
Quoted from Anony:Isn't that the piece that guides the playfield on the side rails?
Yeah I had taken one off , was going to powder the straight edges but thankfully was talked out of it as it might have caused the PF to warp .
Does anyone have a spare Ancient Mariner plastic they would sell to me ? I lost mine been looking for it 2 days with no luck and do not want to buy a full plastic set .Lmk if so and thanks .
New playlist available for Iron Maiden Pro that still includes the animations I added. Premium/LE coming shortly. Merry Christmas!
Quoted from allsportdvd:Question that I can’t find on the rule sheet, my friend only scored 71 million on his game but got the pharaoh bullseye record with 47 bullseyes! Does that mean he hit it up the centre ramp 47 times for 71 million points?
Edit: the bullseye switch was triggering with each left flipper hit. So can a high score for that feature only be removed? Without resetting all high scores?
In the menu there is a setting for each high score, you can reset it there or set it really low and save the settings so you can re-write over your bad one.
Quoted from pinballjah:Does anyone sell a gadget to stop the playfield from slipping off the ends of the playfield rails? Has happened to me a couple times with my Sterns. Luckily no damage so far, but it is a real scary experience when the playfield comes off the rails. Cheers.
Weird, I swear mine has closed ends or hooks at the end so it can't slide off. I'm usually not careful, I just pull it right to the end.
Quoted from PoMC:New playlist available for Iron Maiden Pro that still includes the animations I added. Premium/LE coming shortly. Merry Christmas!
https://pinside.com/pinball/forum/topic/iron-maiden-amp-the-monsters-of-rock-modded-code/page/2#post-7314066
Welcome back, a lot of people were trying to get your code and I had to set up a mega link for about half a dozen people! it's popular
Quoted from Anony:Welcome back, a lot of people were trying to get your code and I had to set up a mega link for about half a dozen people! it's popular
Very cool of you to do that, thanks. You're welcome to post the link(s) here and on my code thread. Might as well share them if it it's still good link.
Quoted from Anony:In the menu there is a setting for each high score, you can reset it there or set it really low and save the settings so you can re-write over your bad one.
Weird, I swear mine has closed ends or hooks at the end so it can't slide off. I'm usually not careful, I just pull it right to the end.
Welcome back, a lot of people were trying to get your code and I had to set up a mega link for about half a dozen people! it's popular
Thank you for answering but which menu? I can’t find any menu with individual bullseye high score reset
Quoted from allsportdvd:Thank you for answering but which menu? I can’t find any menu with individual bullseye high score reset
I'd have to go back through to check, but the main features menu should have an option for all of the high scores. It won't be an option to reset it, but it will be an option to set the high score for each feature. you set it and then go into the scores menu and save it. If I get a chance to play today I will look up exactly where it is.
it's definitely there because when I get a game I set the default scores as low as possible so we can beat them and get names on the attract mode easier.
Quoted from allsportdvd:Thank you for answering but which menu? I can’t find any menu with individual bullseye high score reset
Try feature setting 152. It should be at the current top score of 47. If you lower it, should trigger on the next game to put a new score. Believe that's how anony described it would work
Quoted from Anony:Isn't that the piece that guides the playfield on the side rails?
yeah , I was going to get the stiff backs done but didn’t want to risk warping .
Quoted from Kkoss24:All we need is one pin Rodney !
[quoted image]
Is it back together ?but for 1 piece
Quoted from Jamesays:Is it back together ?but for 1 piece
Mostly (can’t believe I lost that plastic),just finishing up a homemade mod (with the help of a fellow pinsider) with clear drops and purple/frosted light coming from under the PF ,waiting on Liors backboard/oracle bundle which I hear will be soon ,lastly a Spitfire chasing a couple Zeros on the right ramp/habit rail (I’m looking into making these custom ) .I was going to put mirror blades in but after I was done installing the coated parts ,Tilts Album Cover blades looked like they belong so I stayed put .I do want to make a custom topper to add something of my own creation but I need to learn a bit more before going at that project .I do need to find something to cover up the hinge bolts I had to cut out ,but I’ll figure something out .Then that is it haha .I got this pin pretty cheap a couple years ago so I don’t mind customizing this one as it has a permanent home as long as I’m alive .We’ve played it enough where I know it won’t ever get neglected .It’s a unanimous house favorite ,even with GZs arrival .Up the Irons !!
0DAF4AC2-ECCC-4B18-88B7-71F28F273CC0 (resized).jpeg7E180AEB-8D98-4BC6-ABC0-C8B97854E6FA (resized).jpeg9E2D53B5-7B58-4368-9AC4-57DC11E8B89B (resized).jpegSteve @ Pinball Refinery deserves most the credit .He nailed this color/texture down from what I sent him .It seems powder will mostly come out darker so he knew exactly what I wanted and nailed it ! Highly suggest him for anyone looking to coat they’re pins .I really like some of the other powder colors done on this pin but for me it was this all the way .
69B4350E-7F1F-497D-93F1-716717BD2DF4 (resized).pngQuoted from Sleal16:Try feature setting 152. It should be at the current top score of 47. If you lower it, should trigger on the next game to put a new score. Believe that's how anony described it would work
It didn’t show the current top score on any of those feature settings, only the machine defaults. I went and changed #152 to 3 and played a game, still showed 47 on the attract mode afterwards
Quoted from allsportdvd:It didn’t show the current top score on any of those feature settings, only the machine defaults. I went and changed #152 to 3 and played a game, still showed 47 on the attract mode afterwards
There's one more menu option you have to hit after setting it to 3 in the feature menu... sorry I'm being so vague but I can't say from memory. I believe you have to go into the records menu and apply them essentially. I will try to remember to check tomorrow, I just don't know for certain if this would overwrite any of your other scores. You may have to beat the new default to clear what's showing already also. I remember setting the scores when I first got the game low so someone would get it easily and it still showed the defaults until someone beat them.
Quoted from allsportdvd:It didn’t show the current top score on any of those feature settings, only the machine defaults. I went and changed #152 to 3 and played a game, still showed 47 on the attract mode afterwards
Do you have the manual? It shows settings in there….
Quoted from allsportdvd:It didn’t show the current top score on any of those feature settings, only the machine defaults. I went and changed #152 to 3 and played a game, still showed 47 on the attract mode afterwards
I looked it up and there is a resets menu that will reset the high scores to what you set in the features menu. unfortunately I think it would reset them all, you can't pick just one so I'm not sure what you can do if just setting it in the features menu and beating that score didn't work.
Quoted from Anony:I looked it up and there is a resets menu that will reset the high scores to what you set in the features menu. unfortunately I think it would reset them all, you can't pick just one so I'm not sure what you can do if just setting it in the features menu and beating that score didn't work.
Okay thanks for trying. I guess the 1 high score for bullseye hits can be owned by my friend forever, I'm not beating 47 lol
Also got my tilt topper today. Had to drill holes in the top of the backbox and bolt the thing down, no way in a million years that velcro was holding it up
Quoted from allsportdvd:Okay thanks for trying. I guess the 1 high score for bullseye hits can be owned by my friend forever, I'm not beating 47 lol
Also got my tilt topper today. Had to drill holes in the top of the backbox and bolt the thing down, no way in a million years that velcro was holding it up[quoted image]
Spend some games shooting bullseyes while working on your flipper catches. It'll be your initials at least.
I think the "?" champion score on mine is higher than the total number of times I've hit it intentionally in normal games.
Quoted from allsportdvd:Okay thanks for trying. I guess the 1 high score for bullseye hits can be owned by my friend forever, I'm not beating 47 lol
Also got my tilt topper today. Had to drill holes in the top of the backbox and bolt the thing down, no way in a million years that velcro was holding it up[quoted image]
That looks sooooo much better with red T mold .
Quoted from allsportdvd:Okay thanks for trying. I guess the 1 high score for bullseye hits can be owned by my friend forever, I'm not beating 47 lol
Also got my tilt topper today. Had to drill holes in the top of the backbox and bolt the thing down, no way in a million years that velcro was holding it up[quoted image]
Smart! mine fell off the backbox onto my invisiglass! was scary as hell and a miracle it didn’t shatter. i strapped it up with zipties through backbox holes after that. Actually took it off for now too
Just added Insider Connect to our Prem and it adds a whole new dimension to our favorite game. We also wanted a change and swapped in Pro translite. My son is anhuge Maiden fan and thought it better represented Maiden with the various Eddies. Also think it complements the rootbeer powder!
Prem translite still my fave though!
anyone think I should do orange or brown t molding? its a forever keeper!
0E0C9D94-EEE5-482B-8AC8-CB05EE62121E (resized).jpeg7FE49CAF-2AA7-4A55-8383-20877FFF1517 (resized).jpegF7F38D9C-ADDE-40E7-8D1E-EB7015DF3D64 (resized).jpeg
Quoted from allsportdvd:Okay thanks for trying. I guess the 1 high score for bullseye hits can be owned by my friend forever, I'm not beating 47 lol
Also got my tilt topper today. Had to drill holes in the top of the backbox and bolt the thing down, no way in a million years that velcro was holding it up[quoted image]
Screw it down! Mine came flying off onto to my invisi. as well.... I should have known better.
Quoted from Enchantress:Screw it down! Mine came flying off onto to my invisi. as well.... I should have known better.
Yep, especially with the amount of nudging needed on this game
Quoted from Kkoss24:I’m down to my last piece of hardware and can’t find it in my pictures .Can someone lmk where this goes ?
[quoted image]
Lol kinda vital piece of the puzzle
Black ,to me , really let’s the trans POP like it’s supposed to .Some T coloring blows my mind as they take all the attention away from the star .
Quoted from DaddyManD:Just added Insider Connect to our Prem and it adds a whole new dimension to our favorite game. We also wanted a change and swapped in Pro translite. My son is anhuge Maiden fan and thought it better represented Maiden with the various Eddies. Also think it complements the rootbeer powder!
Prem translite still my fave though!
anyone think I should do orange or brown t molding? its a forever keeper!
[quoted image][quoted image][quoted image]
Yeah I would say the next shade darker than your powder .
Ok, here's a weird one. In attract mode my ball lock and diverter are moving by themselves with the lights. Any ideas what could be going on? Works fine in game. Video here:
Quoted from javagrind888:Ok, here's a weird one. In attract mode my ball lock and diverter are moving by themselves with the lights. Any ideas what could be going on? Works fine in game. Video here:
mine always does this once on start up and once after every game to reset the mech. is yours constantly pumping? if so go into the test menu and test the mech. it has four switches associated with it and they can be finicky but are also easy to adjust. run the test and please report back.
Quoted from allsportdvd:Okay thanks for trying. I guess the 1 high score for bullseye hits can be owned by my friend forever, I'm not beating 47 lol
Also got my tilt topper today. Had to drill holes in the top of the backbox and bolt the thing down, no way in a million years that velcro was holding it up[quoted image]
Just got my topper. After reading how these are falling, I hit the local hardware store and bought brackets so I could attach them to the existing screw holes. Just over $12 in hardware, and no drilling new holes!
https://www.lowes.com/pd/ReliaBilt-ReliaBilt-4-in-Zinc-Plated-Mending-Plate-4-Pack/5003416703
https://www.lowes.com/pd/ReliaBilt-ReliaBilt-3-in-Zinc-Plated-Flat-Corner-Brace-4-Pack/5003422155
https://www.lowes.com/pd/Hillman-6-32-x-1-2-in-Slotted-Drive-Machine-Screws-14-Count/3035915
https://www.lowes.com/pd/Hillman-4-Count-8-Standard-SAE-External-Tooth-Lock-Washer/3012406
Hmmmm….I’ve had my Tilt Maiden topper for a couple of years now and the Velcro has held up just fine. No problems at all. Congrats on getting one!
Quoted from Jamesays:Anyone recognize this Black plastic.It came out of the upper loop when I launced a ball through the top[quoted image][quoted image]
Looks 3D printed. Got any mods on your game?
Quoted from RC_like_the_cola:Looks 3D printed. Got any mods on your game?
yes,all of them.But I didnt install this.Previous owner is who I will ask.
It may be the mod for the eyes on the backboard (fits behind and stops the light from bleeding out). I think it is held on with tape, so it could have fallen off.
Quoted from Paddy-o:Just got my topper. After reading how these are falling, I hit the local hardware store and bought brackets so I could attach them to the existing screw holes. Just over $12 in hardware, and no drilling new holes!
https://www.lowes.com/pd/ReliaBilt-ReliaBilt-4-in-Zinc-Plated-Mending-Plate-4-Pack/5003416703
https://www.lowes.com/pd/ReliaBilt-ReliaBilt-3-in-Zinc-Plated-Flat-Corner-Brace-4-Pack/5003422155
https://www.lowes.com/pd/Hillman-6-32-x-1-2-in-Slotted-Drive-Machine-Screws-14-Count/3035915
https://www.lowes.com/pd/Hillman-4-Count-8-Standard-SAE-External-Tooth-Lock-Washer/3012406
Would love to have done this - no Lowes in Australia though
Quoted from dgposter:It may be the mod for the eyes on the backboard (fits behind and stops the light from bleeding out). I think it is held on with tape, so it could have fallen off.
Might be different than the one I got, but mine looks different and I'd be amazed if it somehow made it out onto the playfield from behind the back.
I guess the pharaoh is forward an inch or two from the backboard and it's possible it slipped through. Now that I think about it the blinders kit came with the eye shaped blinder for his eyes and another blinder for something else which I can't recall. I think that's what it might be.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/up-the-irons-the-iron-maiden-pinball-official-owners-club/page/247 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.