Hello, have an f14 project . Game powers up nice displays. No alakaline damage. Bad diverter coil . Beacon motor dead. Cabinet rough. Raised inserts. Will be asking 1100. Woodbury mn
You're currently viewing posts by Pinsider pinballplusMN.
Click here to go back to viewing the entire thread.
Hello, have an f14 project . Game powers up nice displays. No alakaline damage. Bad diverter coil . Beacon motor dead. Cabinet rough. Raised inserts. Will be asking 1100. Woodbury mn
Hope all is well. Just checking to see if anyone has Tommy pinball for sale in these parts. Minor mechanical issues ok. I can pick up. located in MN.
Quoted from msf001:Looking for a Whirlwind as my first pin. Let me know if you’re within 5 hours of Madison and would sell it.
Thats a good choice
This is a project caravelle in woodbury. Nice pf,maybe for parts or restore. Critters had nest inside along with a small fire.. Was part of a bulk buy and want it gone. Price is .25 cents special to the pinsider who can get it out of my garage asap. Will update post when gone. Heckuva deal!
15625030605296279040552675003343 (resized).jpg15625030961284584635446373282749 (resized).jpg15625031125507393702247424559416 (resized).jpg15625031347801419418538138852221 (resized).jpgPingulls is a reputable seller and honest. Ive seen his games and would be confidentbdealing with him.
This is the best time to sell. Shortage of pins and ive had alot of people asking for games these past weeks.
Have a client with a huo Sopranos, documented and 330 plays. Hes looking for 6500. Not sure if too high or not. I saw the game looks new veey clean.
I have a very nice williams 1949 Freshie woodrail pinball.it plays somewhat but has lights out. Offering at 225.00 if anyone wants it. Easy pick up in Woodbury.
I first did business with Big Al in 1985. I traded a Xenon and 200.00 For a Centaur. Al and his wife delivered it to my work at Viking Village in St. Paul. I was 15 at the time.
Al is one of the main reasons pinball is as popular as it is in the Midwest area now. Alot of collectors here in the midwest got started via AL. He would always come in to the operators in the Twin Cities and buy their old non working/dirty games. This process repeated itself probably hundreds of times in the 80's to the 2010's. This gave operators confidence to buy more pinball machines as they knew when the games were rotated on the route they could count on Al to give them a fair price for them. If Al was not around to buy all of those games operators would not have purchased as much as they did back in the day. The company I worked for an operator in the 90's which bought like 35+ Addams Familys and after a few years Al would buy them. The operator would then invest in newer games (T Zone, TOM etc) and the cycle would continue. Locations always wanted something fresh. Even good titles would get stale after a while. Locations were always demanding wanting the newest game regardless if it was good or not.
If you see Al or visit him its good to say thanks for what he has done for pinball in Minnesota and beyond.
Quoted from skink91:I agree. I think both Al and Aaron are awesome.
Surprising move. I would imagine going to quarters would increase likelyhood of breakins in the games.
Maybe they had issues with other tokens being used in their place?
Quoted from cavalier88z24:yes. this guy tries to beat NHL high score. Seldon got 6 billion on Jurassic park and is trying to beat it. so he screws with the legs. lowers them in the back and jacks up in the front. The bubble level is off the chart. but what pisses me off is i walk up to the game not suspecting it. Put a dollar in it and hit play. then im like WTF. you cant turn it off or lose the game?. so you try to level it with it playing. lol. loss the credit anyway. If i see this guy im going to say something. This guy owes me money.
Time to bring back the roll tilt mech
I have new pinball glass if anyone interested. 50.00 each or 3 for 135.00. Delivery possible in metro area on 3 or more purchased. Thanks! Jr
Hello All . Thanks for the comments. and messages.I plan to reevaluate after the crisis is stabilized. For Now things are on hold as far as in home service. Too young to completely retire yet! The last 10 days have been pretty overwhelming for me and my family. Lack of sleep and anxiety will do that. I dont think I can ever possibly leave pinball competely. Thanks! JR
I am offering new Standard playfield glass for pick up at a special price. Price is 40.00 or 3 for 110.00.normally 50.00 ea.No contact pick up. Wrapped in plastic. Covid protocols in place at my studio.
Additionally, if you have a board issue or need a part just let me know. I can see if I can help. Just PM me . Thanks. HAPPY FLIPPING!
Quoted from fanuminski:Class of 1812 interest anyone? (sort of Ugly...in a good way?)
What your price?
Quoted from beergut666:What do you expect them to do? Pretty easy to sit back and judge from Woodbury. Come on over to where I live and see what people that are struggling think about what people in the suburbs have to say.
I have family in the area and they are scared. My emotions got the best of me. Sorry to upset you. Keep safe!
Quoted from J-Freeze:They are talking pinball on KFAN right now on Common man show.
What they say?
Quoted from amalongi:And a shout-out to MustangPaul as well. What a stand-up individual! One of the finest Space Station machines I have ever seen, now residing in Maplewood. And the bonus tour of not only the game room but of the Mustang project as well was superb. Thanks. After years of living all over the globe, I don't think I could have landed in a better place than the back home upper Midwest! Three cheers!
Paul is one of the nicest pinheads in MN. Lots of enthusiasm and passion for the hobby as well.
Quoted from hoov:Looking for a nice fully working STTNG for a friend. Full LED's, color DMD, other mods/extras a bonus. Let me know if you have one you want to sell.
I can pass your info on to a customer of mine. He has one that meets your criteria. Color dmd etc. Has reset issue I will be taking a look at next week.
Wondering if anyone has some suggestions on powder coating in the map area? Have a wcs94 and the customer would like the rails and legs etc purple. Thanks in advance!
Gary southward may have one also derek sanders . Derek advertises pinballs on craigslist and had a couple last time inwas at his place.
Quoted from gordonshumway:What is the value of a Harlem Globetrotters in very fine condition? Found one out there and the owner who isn't really into pins has no idea of its worth and neither do I.
I would say 400 to 900 depending on cosmetics. I would assume boards need attention and rubber. flippers targets need work. If well cared for and clean low use high end would suffice. I maybe way ofd the way prices are though.
Quoted from pinballplusMN:I would say 400 to 900 depending on cosmetics. I would assume boards need attention and rubber. flippers targets need work. If well cared for and clean low use high end would suffice. I maybe way off the way pin prices are though.
I have several sets of used pinball legs. Most have rust but may clean up. 28.5 inch. Passing on to group. Just pick up. Free.
Also used pinball glass standard size some scratches. Same price.
Woodbury pick up.
Quoted from foxtj24:I picked up a real nice Elektra, Not sure how well it fits in my collection if you want to check it out.
I may have a buyer if you decide to sell. Thx
I have a supersonic on cl now if any locals interested. Project game. Send me a pm. Also free pinball glass if anyone needs. Thanks!
Will be having a Firepower soon if anyone interested. Price around 1550.00 Will have Nv ram, connector, fused bridges etc. If anyone local interested. Will be happy to dontate to PS if sells. Thanks!
Also: Free Pinball Glass for pick up.
Quoted from brobra:Just finished up a Judge Dredd with topper. Open for trades…listing forthcoming…
Also just in; but still going through:
High Speed
High Speed II (The Getaway)
Another Black Knight
And Black Knight 2
Pm with interest on trades.
Next Road Adventure:
Wednesday 8/11 Minneapolis to Des Moines to Sioux Falls and back to Minneapolis if there are any hauling needs up or down that general route.
There’s an outside chance I hit Fargo after Souix Falls, then back to Minneapolis.
Happy pinning, bros.
How many miles so far in 2021? Lots of driven man!
Quoted from Bohdi:Shot in the dark, but might as well try. Need a couple coil stops for my IMDN. PBL has them, but I need nothing else and prefer to not order just these 2 little parts, but I will if I have to. Anyone in the Twin Cities have a couple they'd sell?
Hello, I should have 2 . I can confirm when back in the studio.
Quoted from trilogybeer:I sold some pins to buy a car as well. Plenty of car people in the pinball hobby.
Big Al from Pinball Warehouse was smart as he attended car shows constantly and promoted his business as well at the same time. I recall in the 80,s he'd bring games to various car shows and have them in his booth along with Jukeboxes.
Quoted from CaptainNeo:I have a friend looking for a dedicated arkanoid arcade. LMK.
Always thought that was a kit game.
Quoted from CaptainNeo:so it was a kit only? :/ no wonder you don't see many around.
I had like 6 of those on location in early to mid nineties. You could buy them from ops for maybe 200 dollars. They would pay for themselves in a month. They did well in laundromats and pizza places. Great game.
Quoted from northvibe:They must do that for people they like
On another note my neighbor had to buy a lot of cd jukeboxes for a part for his. And now has a bunch of extra stuff he doesn’t want/need. Lot of NSM wall hanging juke lboxes, anyone interested?
I can pm a pic
That's nice to know that Stern seems to be changing in areas of customer support. Will be ordering games again. So many good titles they make.
Listing a ss Cleopatra working players game. Will.need to be shopped. Has connectors repinned, miwumpf board, power supply recapped. Cabinet a little rough.pf has wear. Just pm for details. Will be happy to donate to pinside if it sells here.
I have a Cleopatra on Mn Craigslist for 1150 if anyone is interested. Will sell a bit cheaper for a pinsider that would like a nice working project. Thanks!
https://www.gofundme.com/f/zc7wx-stephen-kinderman-medical-bill-fund
Figured I would share this. I wasn't aware of this until now. I heard he was ill but not too many details. Steve always does nice work. We would always refer mechanical repairs to him and people were more than satisfied. Reading the description is pretty heart breaking about his service call.
He is a pretty good stand up guy.
minneapolis.craigslist.org link
Selling this project if anyone interested. Perhaps swap swap to a seawich or Stars? Will be happy to donate to pinside if it sells.
Also. FREE pinball playing surface glass Must take all 3
Hello All and Happy Easter!
have a BK if anyone interested. listed on CL and will be happy to donate if it sells here. Perhaps the MN crowd is interested. Will happy to discount for a Pinsider! Thanks!. JR
Quoted from orangegsx:If anyone has anything for sale I've got a buddy looking for his first pin. Wants to keep it around 3K$ and if it's a project I'll help him out not a huge deal. Located in North Dakota but will ship or travel. thanks!
Have black knight project. 2100 powers up and plays stp mn area.
Hope all is well!! I have a client thats looking for a Freddy if anyone is selling close by . Thanks! JR
Just letting everyone know that I got word that Steve Kinderman from Old School Pinball has passed away. He was a pleasant guy and a good EM tech. He would always follow up with the customer after doing a restore and really had a passion for the hobby.
Quoted from WildRover:Who around here has owned a WOZ and can share with me their experience? I've really considered trying to find one lately...Talk me out of/into it
Game is gorgeous to look at. Ok to play. The fun begins when you have to remove the mini playfield for the first time to replace a door motor
Hope everyone good.
I have a Comet project if anyone interested. Game powers up and plays. Needs cleaning, maybe hardtop? Nice bg, no alkaline damage on board.cabinet has scratches, pressboard on rear of head has bowed out from moisture as it was in a garage for years, should be replaced. A couple of the displays are showing very early signs of measles.Nice winter project for someone. 1250
Easy pick up in woodbury.
Quoted from pinballplusMN:Comet sold
I have unlimited free pinball glass standard for anyone interested.
Used glass.
https://pinside.com/pinball/market/classifieds/ad/151343
I have a Firepower locally if anyone interested.
Quoted from Jason_Jehosaphat:Thanks for the tip. I will take a look. I saw a VOD of an amazing seminar from CGC last Expo. The dude went into great detail about how the mechs in CCr were re-engineered for durability. He had this legit Powerpoint going, with copious diagrams, and it really sold me - not on the game, but on the ethos of the company. To be honest, my interest in Pulp Fiction has much to do with that, as I get the impression that Doug Douba is more focused on quality than other company heads. Unfortunately, watching gameplay of PF from TPF has tempered my interest in the game a bit, but I will be excited to see/try LTG's when it lands at his place soon.
Chicago gaming build quality is really good and the remakes are great. I could tell a lag on MM early remake but games since have been spot on.
Anxious to play LLoyds PF
Hey. They want to name the New Mall Of America dog for the canine unit. link below. lets see if we can get it named "pinball"!
Quoted from WildRover:Anyone have a recommendation on a local that does pinball clear coating...and does it well?
Not sure if Neo could help? He did a couple for me.and turned out nice. A ways from you but maybe he passes your way.
hope all is well. may have a Nitro Groundshaker FS soon. powers up and plays.needs cleaning rubber and lamps very nice cab,bg, pf has minor wear around bonus inserts. Figured id offer to anyone that may want one locally before listing on marketplace. if it sells happy to throw pinside some$ 1450.00
Quoted from pinballplusMN:hope all is well. may have a Nitro Groundshaker FS soon. powers up and plays.needs cleaning rubber and lamps very nice cab,bg, pf has minor wear around bonus inserts. Figured id offer to anyone that may want one locally before listing on marketplace. if it sells happy to throw pinside some$ 1450.00
Thanks whoever reffered client. It has a new home in Mankato!
Will be having a Riverboat Gambler Fs soon if anyone interested. Prefer not to ship.comet leds,new rubber, flipper rebuilds etc. 2900.00 will donate to pinside if it sells here .
Im Looking for a bk2k as well.
I have a client with a ball bowler united team bowling 6 player. He is in Southern mn. Cosmetics are very nice from pics. He has moved it to his garage for easy pick up. He is at 1k. Please pm me for.more details. Just trying to help him move this.
I will have a jungle lord available soon. Powers up . Will need cleaning. very nice pf, Bg is not bad but should be sealed asap. Cabinet has dings etc. I will make sure game works for the buyer. Will need to be cleaned up, battery holder etc , usual pcb upgrades caps etc. Local pick up price 1400.00
I have 100's of 47, 44,555 incandescent pull lamps from led conversions. They are free to whomever wants them.
Some Used pinball Glass Free/ nice if yours is missing or heavily scratched. .
I just had some new tempered pf glass that became available for those that are interested.
Standard sizes are 50.00 each or 75.00 ( (37.5 per sheet) for 2 bundle Pm me for larger orders
Widebody Superpin sizes are 65.00 each or 115.00 ( 57.5 per sheet) for 2 bundle ( very limited quantity)
Easy pick up in Woodbury. I may be able to drop off in my travels as well if Im in your area.
Happy Flipping!!
After speaking with Dan the last couple days I can say we are on a good standing.
Mistakes happen and sometimes when you hire a web design company they just want to do it the easy way and be done with it like other professions sometimes do. This appears the case here.
I look forward to visiting Luke and Dan's new place in the near future! I hope to play in the end of year tournament as well if timing allows.I forgot how much I enjoyed playing in them. Happy Flipping! JR
https://pinside.com/pinball/market/classifieds/ad/172006
Super project F-14 For anyone interested. Thanks in advance!
You're currently viewing posts by Pinsider pinballplusMN.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/unofficial-wisconsin-minnesota-thread?tu=pinballplusMN and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.