Twilight Zone
Bally, 1993OK I have given up trying to get my sensor adjusted right. It needs to be effectively touching the ball to work right if is off by less than 1mm it will not work and that pretty much happens within a few plays. Does anyone have any recommendations for good replacements out there?
Thanks!
you could mod it yourself too for a lot less than 65$ plus shipping. A 100 ohm pot is cheap
http://www.actionpinball.com/tech/tz_prox.htm
Pinbits is out so I contacted them to see if they will be making up more. I may go the DIY approach have to think about it and see if I can get a pot or need to order it from overseas. Thanks for the offer LitzDoc I may take you up on it! 
Here's another option:
http://mad-amusements.com/product.php?id_product=737
I have these red boards in my game, and they work very well.
Quoted from gweempose:Here's another option:
http://mad-amusements.com/product.php?id_product=737
I have these red boards in my game, and they work very well.
Thanks!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tz-trough-proximity-sensor-recommendation and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Hopkins, MN