Having trouble with my TZ. I went to play this evening and I just get a blank dimly lit display. That is it. All lights are lit on the boards except the the light on the display board is not lit. I have pin sound and LED display. I have a kahr daughter board and the solid red light is on. I have reseated all ribbons and connectors. Also all fuses are good.
Any help would be much appreciated. Thanks!

Thanks Lloyd! If so, would it more than likely be a bridge rectifier?

Tip 1- 13.04
Tip 2- 175 (should be volt)
Tip 3- 12.04
Tip 7- 20.05
Led 4 on driver is also out.

Any suggestions?

Yes without Kahr. The wires look good.

Yes TP2.
F113 is good. Took board off and BR2 looked like a cold solder so resodered it and still same. I have a new rottendog driver board so put that in and everything works great. May just replace all bridge rectifier’s. Anything else that I should replace. I think the issue lies in the bridge rectifier. May bring board with me to York show. I wonder if they are doing repairs there?

Thanks Lloyd. May just replace BR1 and BR2.

Thanks Guys!
Are all the BR’s the same size?

Sorry, I meant to say... Are all 5 BR’s the same —> at least 200v 35 amp. I have changed a few in the past and they were the same.

Thanks so much!!!! I appreciate the help!