Twilight Zone
Bally, 1993You're currently viewing posts by Pinsider huo.
Click here to go back to viewing the entire thread.
Quoted from Triumvirat73:For TZ I personally go with cool. For no other reason than the playfield is a bit on the "dark" side to begin with so I find that the cool look in the GI tends to make otherwise difficult to see areas not so difficult to see. I'm also a big fan of the upper playfield LED strips that illuminate that area as well. Just IMO, of course.
Where do you place the led strip you're talking about?
Quoted from tamoore:I go frosted if I think I'll see the bulb at all, unfrosted if not.
In the back box, I always go with the really cheap pinball life frosted non concave bulbs. They're not as bright, which I like for the back box.
I noticed the frosted had a better glow than the standard retros. I'll look into the pinball life bulbs. I usually go with CT.
Quoted from oyvindmo:So, while you're here thinking: Do you have any suggestions for backbox GI? I would like some LEDs that can be dimmed to quite low brightness without starting to flicker. Any ideas?
I'm not sure that you can get rid of backbox flicker. Or at least I haven't read a way to do so unless its that led ocd mod.
You're currently viewing posts by Pinsider huo.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tz-gi-warm-or-cool?tu=huo and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Ontario, CA