Very common problem, and can be very annoying. Folloow the guide as posted. I could tell you I reflowed the solder on J102(?) the other day and it fixed it, but that's just one of the many things
You're currently viewing posts by Pinsider TheLaw.
Click here to go back to viewing the entire thread.
Very common problem, and can be very annoying. Folloow the guide as posted. I could tell you I reflowed the solder on J102(?) the other day and it fixed it, but that's just one of the many things
Quoted from STxFarmer:After I put the playfield back down I pushed and tugged on a few connectors and guess what? The game played over 30 minutes without one reset.
Sure sure you probably just fixed it for awhile so enjoy it whilst it's working. My DH had this issue and reseating J101 on the driver board, thanks Chris, would fix it for days or even a week, but it would always creep back until I reflowed.
So just look out for that down the road.
Quoted from ChrisHibler:Probably J101.
You're currently viewing posts by Pinsider TheLaw.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tz-dying-in-middle-of-game?tu=TheLaw and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.