Twilight Zone
Bally, 1993You're currently viewing posts by Pinsider 85Txaggie.
Click here to go back to viewing the entire thread.
Not sure, but I would check all the connectors since it changed after you pulled the board. Make sure no connectors fell behind the board possibly shorting out. Use the manual and check color codes to connector numbers.
What is going on at J102? I would fix that if it where mine.
Quoted from 85Txaggie:What is going on at J102?
J102 should have 8 wires.
Screen Shot 2016-12-28 at 7.37.35 AM (resized).png
J114 should have 3 wires.
You're currently viewing posts by Pinsider 85Txaggie.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tz-blows-f601f602-fuses-on-startup-after-power-driver-board-reinstall?tu=85Txaggie and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Renton, WA