Hey guys - my Twister relay board has seen better day. This is apparently the replacement. http://www.marcospecialties.com/pinball-parts/502-5032-01
I bought one but have a couple of questions. I see it does not have any diode or capacitor as the original board did and additionally, the connector is wrong. The original harness has 4 wires into a molex plug. I can put new trifurcon connectors on this one to make it match the molex plug, but there are six wires on the new one and only 4 on the old. Thoughts?
Old board is this one:
http://www.marcospecialties.com/pinball-parts/520-5010-00