great idea, here is a bracket I made in a couple of minutes. Really opens that lane up for a better view.

tz brkt (resized).JPG

Thanks John, looking forward to this.

I got the new clock board yesterday and installed it. Waveman did an excellent writeup of his install and my experience was similar although my old board was fine, no hacks. Instructions were well written and the spacers included are a great idea, as my old ones were in poor shape. Everything came apart and went back together easily thanks to great design by Williams. It took less than 30 minutes and the result is impressive. I changed all the inserts to LED's some time ago and this board makes the clock pop to match. As a bonus my first game after the install I got "Lost In The Zone" and set a new high score. I would recommend this product. Thanks John!

IMG_1691 (resized).JPG
IMG_1692 (resized).JPG
IMG_1703 (resized).JPG
IMG_1702 (resized).JPG
IMG_1698 (resized).JPG
IMG_1697 (resized).JPG
IMG_1696 (resized).JPG
IMG_1695 (resized).JPG
IMG_1694 (resized).JPG

You could repair the divot with this. The cliffy will cover it anyway and you can play it now. It will be better for the cliffy as well, give it support so it doesn't deform to the divot. It looks to me that when the ball is in the proper place the kicker is fine. When the ball is in the divot the kicker is almost at the end of its stoke when it hits the ball.

pasted_image (resized).png

I got one of the test boards and it is awesome! Easy install and looks great.

I like led's in the inserts and incandescent for the GI. LED makes the inserts pop.

I colour matched the inserts. Be sure to check with bulb is required 44 or 555 some need flex. I'm sure you will want to led your flashers as well.

this is awesome, check it out. I am very happy with it.

This rocks!

I think these look pretty good in yellow.

http://www.pinballlife.com/index.php?p=product&id=3211

I use a combination of led and incandescent plus the rbg strip for the door.

5EED9A2F-FE2E-426F-8751-484E7082A5B5 (resized).jpeg

F793AB1D-099F-4866-8B3D-AF21CA9E0E48 (resized).jpeg

some do.

IMG_1704 (resized).JPG

for 555 flashers you could use these from Comet
http://www.cometpinball.com/product-p/1smdblink.htm

gameroom designed a clock board and sells it through Pinball life. I was lucky enough to be a tester. It works great and matches the LED's in my machine.

https://www.pinballlife.com/twilight-zone-clock-pcb-assembly.html