Need so help… I just restored a TZ with LEDs throughout. I didn’t install a OCD GI board yet because I’m seeing zero change in the different GI levels. Normally on other games I’ve gone, the LEDs would flicker while the GI is dimming by stepping through the levels. I haven’t added a OCD board on this game yet only because I haven’t noticed that it is attempting to dim at all. I went into the test mode and stepped it through the GI levels and simply no change. Is there something wrong with the game I’m working on, or maybe a setting? I’d gladly add a OCD board but something seems up.

Thanks guys for all the help!! I’ll be home in an hour or so to check. So as for the adjustment, I assume you’re referring to Adjustment 25: Allow Dim Illumination. I think I checked that a few days ago already but will recheck. If that’s set right and the problem persists, I’ll read up on the zero-cross that was linked. Thanks again! Will report back shortly…
Leebo

Looks like the dimming was turned off after all. I turned it back on, went into the GI test and now all the levels respond with the flicker I’m used to w/o a OCD board installed. Looks like I’ll get an OCD board ordered. However I just played a couple test games now with dimming on and didn’t really notice the GI ever attempting to dim (except for power saver a few minutes after game over).

Perfect! Thanks for the heads up. That helps.

I too prefer the LED ColorDMD look over the LCD in general but feel it sorta depends on the game. That said, the LED for TZ looks awesome. I’m out of town right now but will grab video of the TZ I’m restoring when I get back late tonight. I just installed a LED ColorDMD and it looks great. Here’s a still shot for now.

DCEE6946-0559-481B-996A-6ED8446B8C8E (resized).jpeg