Having issues with the powerball not being detected in the trough. What opt or board needs to be replaced?
You're currently viewing posts by Pinsider pacman11.
Click here to go back to viewing the entire thread.
Having issues with the powerball not being detected in the trough. What opt or board needs to be replaced?
Thanks guys I made sure the connection was tight on the eddy board and everything is working good now.
Quoted from Scotty_K:As someone may have mentioned before, that might not be sufficient. It will work perhaps in the short term, but as time goes on, with vibration and all, it might work its way loose again. See how it goes, but the only true solution is to solder the wires directly to the pins on one end, twisting the wires, and then soldering the other end.
Yeah will see how long it goes for.. I used a tiny regular screw driver and push the wires back into the connectors which seemed loose.
You're currently viewing posts by Pinsider pacman11.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-owners-club?tu=pacman11 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.