Twilight Zone
Bally, 1993You're currently viewing posts by Pinsider lynnpin.
Click here to go back to viewing the entire thread.
Regarding the Auto Shooter misfiring, I had the same problem and found a great fix at Dr. Ed Cheung's Pinball Blog and have had no problem since. All of Dr. Cheung's restoration work on his pins is worth reviewing. The fix is at the end of this link: http://www.edcheung.com/album/album08/pinball/tz.htm Good Luck
Quoted from Barr993:On my TZ, the ball ejector and auto shooter are both only successful in doing their jobs about 2/3 of the time and seem weak. The ball ejector feels free, not binding. Anyone have similar issues?
Barr933 - Fixes that really work for both these issues you mention are given previously in this topic. Sorry I don't have the exact link; however, a quick search should help you to locate them. Good Luck
Quoted from merccat:I don’t like alligator clips because they are ugly as hell. Soldering in is also problematic as depening on the wire route you may make future servicing more difficult.
I usually build a small connector to tie into the harness. If there is something nearbt with a connector already can build an Y or just add in where it fits best. That way it’s still easily removed when needed and looks like it belongs.
Spend the extra 5 bucks on a few molex connectors. Besides then the next guy won’t have to guess where to hook it back into.[quoted image]
I like your custom connector, but what "next guy" are you talking about? No one is getting their hands on my TZ. I plan to be buried with it!
You're currently viewing posts by Pinsider lynnpin.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-owners-club?tu=lynnpin and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Milwaukee, WI