Twilight Zone
Bally, 1993You're currently viewing posts by Pinsider dsuperbee.
Click here to go back to viewing the entire thread.
Hoping someone here can help out. Working on a buddy's TZ that has the pyramid topper that pinball pro sells (see a link to the topper below) but all the connections to the topper were unplugged, not labeled, and I have no instructions. Does anybody have this topper that could tell me where the connectors are supposed to go, or can scan the instructions? Reached out to pinball pro but never heard from them.
Quoted from _litz:Unless they're really dirty, the tunnels on TZ are see-though .. you should be able to lift the playfield and see where the balls are.
There are three places the ball falls down on one side : town square, gumball, and piano
and the skill shot on the other.
All of these feed to the slot kickout.
Typically there's a light bulb down in there blocking the path (often it's the yellow light by the mini-pf, or one of the piano lights)
Odd, the TZ I have at my house currently is having issues too, but mine are gummed up switches. They all have enough crud in them that the balls won't rollover the switches. If there is no bulb or something along those lines blocking the balls, check to see if the switches operate smoothly.
Quoted from scampcamp:On my issue with balls not coming up... it was a stuck purple post sleeve against a switch lever.
Here's another riddle. The flasher near the upper right flipper is stuck on & is melting. Any idea why??
You have a shorted transistor and or a shorted pre drive transistor.
Quoted from scampcamp:In the Cointaker led instalation guide it says to use a 555 warm super here but when i do the all flasher test... it flashes. Should a 906 flasher go there??
Always double check against the manual as well, they always show the locations of the flashers.
You're currently viewing posts by Pinsider dsuperbee.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-owners-club?tu=dsuperbee and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Sacramento, CA