Twilight Zone
Bally, 1993You're currently viewing posts by Pinsider cherries_jubilee.
Click here to go back to viewing the entire thread.
Quoted from AndHart120:and didn’t realize the plastic channels from the translite won’t work
Actually, the plastic channels Do work. The CPR glass is the same thickness as the original Plain Glass on your game.
Remove the Plastic Channels and set aside.
Remove the Original Glass and Translite....Put them away, you won't be using the Original Glass anymore.
Put the CPR Backglass in place.
Use the Original Plastic Channels to secure.
Done.
Quoted from AndHart120:When I put the translite back together it easily slid back together. The CPR glass did not.
It sounds like your Existing Plain Glass in your game is not 1/8" Glass and has a different set of Plastic Channels. I would suspect that at some point someone broke the original glass and had the thicker glass on hand and used that with thicker plastic channels instead of using the correct 1/8" glass and original channels. Operators out on location were notorious for doing hacks like this just to get machines back up and running/Earning again.
You're currently viewing posts by Pinsider cherries_jubilee.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-owners-club?tu=cherries_jubilee and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Martinez, CA