Hi, on (almost?) every new ball I can hear the coil of the slot machine kickout that fire twice.
Do you have an idea of the cause of this symptom?
Thanks
You're currently viewing posts by Pinsider ben38.
Click here to go back to viewing the entire thread.
Hi, on (almost?) every new ball I can hear the coil of the slot machine kickout that fire twice.
Do you have an idea of the cause of this symptom?
Thanks
I will check this switch. But it is only at the beginning of each ball. Never during a run. If the switch was out, it will occur anytime, no?
And when a ball is really inside, it always run fine.
I confirm, this is the switch 58. I test it, and it works perfectly. No false detection, and good detection each time I press it.
Does anyone has another idea? Or already has this symptom.
Merry Christmas
Quoted from Rdoyle1978:The backboard? Behind the gumball machine / ramp / etc?
Yes, this one.
Quoted from Mad_Dog_Coin_Op:Check my post 5865 in this thread. I had the same issue. The plywood is 3/4” thick and it is 6 1/2” tall. The width is the same as the playfield.
Thanks a lot for the informations ! I will have a look to the post you suggest.
Quoted from Coyote:Yeah, it's a flipper-align hole. Take the rubber off the fliper, slip a toothpick in the hole, and rest the fliipper against the toothpick for 'proper' alignment.
If I do that, the ball coming from the right orbit or from the diverter, will hurt every time the rubber that stand between the hitchhiker lane and the camera line. And bounce toward the right slingshot (or sometimes the right outlane... )
Not yours?
Quoted from Neal_W:Make sure your playfield is level.
Yes it is. Left-right level is OK. And level is between 6,5 & 7°
Yours don't do that? If you send a ball in the right orbit, and don't catch it with the upper left flipper, where arrive the ball?
Left flipper, sdtm, right flipper?
Quoted from Mneubey:Is pinball life the only place to get 545 bulbs?
I bought mine here. Ship worldwide from France (I'm in France)
http://www.flipperled.com/PBSCProduct.asp?ItmID=21921393
http://www.flipperled.com/PBSCProduct.asp?ItmID=21921401
They are very nice. And they are not synchronized, so it has a good effect. The same as the original incandescent bulbs.
Quoted from Mad_Dog_Coin_Op:Mine was missing also. It is 6 1/2 inches tall and the same width as the playfeild. Below is a link showing my replacement.
https://pinside.com/pinball/forum/topic/twilight-zone-owners-club/page/118#post-4408756
Thanks a lot !
Quoted from Compy:3/4" sheet
Happy to help! Here's a CAD layout. Measurements are in mm.
[quoted image]
Perfect !
You're currently viewing posts by Pinsider ben38.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-owners-club?tu=ben38 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.