Quoted from LitzDoc:What tension/color should the shooter rod spring be for TZ? Mine seems very soft/low tension.
You want it to be very soft, as the skillshot would be extremely hard with a high tension spring....
You're currently viewing posts by Pinsider aukraut.
Click here to go back to viewing the entire thread.
Quoted from LitzDoc:What tension/color should the shooter rod spring be for TZ? Mine seems very soft/low tension.
You want it to be very soft, as the skillshot would be extremely hard with a high tension spring....
Quick question as I’m chasing down a few issues with my new TZ: the manual shows J124 is being used on the driver board. There is nothing hooked up to my J124 pins nor is there anything corresponding to that connector in my back box. Is this an error in the manual or is there something hiding in my back box somewhere??
Quoted from Mikespinball:Can you double-check J124 on the PowerDriverBoard as for some reason people like to plug it into J132 to see if that's where its at. Do this by checking with the manual matching the colors/wires on the plug as I had this same issue with a Demolition Man.
Checked J132, it’s empty as it is supposed to be.
Quoted from AUKraut:Quick question as I’m chasing down a few issues with my new TZ: the manual shows J124 is being used on the driver board. There is nothing hooked up to my J124 pins nor is there anything corresponding to that connector in my back box. Is this an error in the manual or is there something hiding in my back box somewhere??
Found it!! It was plugged into J131. Kudos to Mike, led me down the right path!
Quoted from Manny65:Well at least you know the PF under the mylar is in good condition and if you're not a fan you can always remove it. Mine came off quite easily when I got my PF restored
I don't believe that's mylar that you are seeing, that's a crack in the upper layer of wood. Look at it go around the door inserts....
Quoted from Jason_Jehosaphat:Back-panel decal to liven up the PF...
[quoted image][quoted image]
Been eyeing that one myself....how is the quality??
You're currently viewing posts by Pinsider aukraut.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-owners-club?tu=aukraut and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.