Hello,
Does anyone have or know where I can buy a replacement clock face (plate to which the decal is attached). Thanks!
You're currently viewing posts by Pinsider alaskanzen.
Click here to go back to viewing the entire thread.
Hello,
Does anyone have or know where I can buy a replacement clock face (plate to which the decal is attached). Thanks!
Quoted from Scotty_K:The "insert" that is being referred to would be the GI lighting in the back box behind the back glass, namely the bulbs specifically behind "Twilight Zone" at the top center, and the two bulbs behind the clock at the lower right. If these are lit and your clock is not, then I would guess that you have a connection problem.
I am having the opposite issue, clock lit but the insert dead. Connection/wiring the place to start? Thanks.
Quoted from german-pinball:Please make us a photo of the wiring of these bulb sockets from inside the backbox.
Also make photos of J120/J121 !!!!!
You can also try the following:
Put Connector J120 into J121 - what happens?
Put connector J121 into J120 - what happens?
Hello,
I have the opposite problem. The insert bank on my tz is doa but the clock is working. As you suggested I swapped j120/j121 and no difference. I’m thinking this indicates issue is perhaps. In the insert wiring, either at the pins or in the line? Would you agree? Fuses all check out. Thanks a ton.
Speaking of mods, I have to highly, highly highly recommend the mirrored backglass from CPR. I scored this a few months back and coupled with mirrored blades the glass is nothing short of amazing.
Quoted from Davi:In case of flasher activity*, the door panel flashers are also activated.
(*These 4 flashers)
Upper left insert, GUM -》upper left ramp flasher
Upper right insert, BALL -》upper right ramp flasher
Lower left insert, LOCK 1 -》pop bumpers flasher
Lower right insert, LOCK 2 -》upper right flipper flasher[quoted image]
Count me in for one as well my man.
Quoted from awesome1:Curious what you didn't like about the GI-OCD board?
I love the one I put in my TZ... didn't realize all of the dimming and other effects I was missing after I went with LED lighting.
I loved it as well, along with the insert board. A must for any pre 2012 pin imho.
You're currently viewing posts by Pinsider alaskanzen.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-owners-club?tu=alaskanzen and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.