I recently acquired a TWZ. It had the lighted apron, but the connectors from the board are gone. I’m not seeing anything online, does anyone know where I can get the correct connection?

It appears to be the one pictured.

420A2250-9C7A-41BE-8D22-E43DD90ED70D (resized).png

Sounds good, I’ll also thrown in $100 since I don’t think it would be fair to you

Appears I need an EL wire inverter, now to find one.

Looks like I’m missing a lamp. I was going to get one of those spiral signs and noticed I didn’t have the socket to attach to.

I can run one, but I’m not sure what it will connect to. I can run off the power ball insert, but wanted to see if anyone knows where it normally hooks up to.

2BBB91AC-6E73-402F-A284-44C942DE2A3C (resized).jpeg

I messed with it for a bit tonight. It looked like the lamp was cut off and never soldered back. The molex connector was still plugged and the yellow and red wire was there. I soldered it into a lamp. It works, but when a bulb is plugged in, the slot machine and gum all lights stay lit or get brighter, so I’m kind of lost.

Attached are the two connections I’m referring too (image from google)

25A4FF54-74AA-4F64-BC76-3F1FECA5A5A4 (resized).jpeg

I didn’t even think about the diode, whoops. Thanks everyone for pointing it out.

Finally got around to take 2, with a diode and everything works as it should. Thanks again for all of the replies.

I've been casually looking and haven't found an answer anywhere. Does anyone have a part number for the spring that goes below the upper playfield?

Tx8uxk6 (resized).jpg

Awesome, thanks a lot. Nice and vague “spring” lol