Twilight Zone
Bally, 1993You're currently viewing posts by Pinsider Happy81724.
Click here to go back to viewing the entire thread.
Quoted from Lostcause:I have cold white and the rainbow leds coming, wasn’t sure what would look best with the white clock face, has warm white at the mo which looks ok.
PCB is blue which I haven’t seen before and will match the blue clock case.[quoted image]
My leds are not working well in 3 of the 4. They keep loosing up. Do I need new leds? If so, where did you buy yours?
Quoted from german-pinball:Fullfilled the special wish for a guy from Canada - first RED clock board ever produced - I think, will look good in a red clock housing ...
Take care and stay healthy my friends!!!!!!!
[quoted image]
[quoted image]
Nice, any idea where to buy the leds that fit in there? Mine are not working properly
Quoted from german-pinball:You can get them from me. What problems do you have, with what colors?? Do you have my board and when did you buy it???
They are red and it came with my TZ so not sure where the board came from but they are little squares with 4 prongs. They seem loose and will light up if I get them just right but the vibration loosens them or something. You can see the left only works and usually it’s just the top left consistently
7A16ED6A-FA31-4F9F-8420-B6EB0F8226AB (resized).jpegQuoted from german-pinball:Thanks!!!
Yes, that is my board.
Mightbe, that the sockets have become a bit week over time. Please take the 2 right LEDs out and gently bend the 4 legs of the LEDs slightly outwards for 1/2 mm or so and then insert the LEDs again, these should then sit a little more firmly and securely in the sockets.
If that doesn't help, I will solder 4 new sockets for you for free after the end of the covid-19 crisis. But please try to do the little bending first and post a photo ... I want the four red LEDs see lightning
I can’t get them, I’ve tried turning them every way possible and separating the legs. The one that works I can move to any spot and it works every time. Is there a secret on how they sit?
image (resized).jpgQuoted from german-pinball:The LEDs should have a notched edge and this must show to the LEFT side for all LEDs, imprint on board is "C"!!!
Your LAMP 4, that actually lights up, is NOT installed correct!!!!!!!
Attached is the installation guide!!!
[quoted image]
I got 3 out of 4 by putting solder on the legs but the 4th keeps flickering. Do you have a site or no a place in the states to order those leds? The good one I can put in any spot and it works every time so might be easier just to buy them. Just looked over the the 1st is flickers too. Please let me know. Thanks!
Quoted from Mad_Dog_Coin_Op:That’s kind of on the weird side. I take it the sound and game play fine after the chip swap? If that is the case, you probably just need to reset the ribbon cable that goes to your display. It probably shifted a bit went you did the chip swap.
Yep, everything works great and when I turn it on the color lcd display looks perfect but over time it starts to get squiggly. I’ll mess with the ribbon cable
You're currently viewing posts by Pinsider Happy81724.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-owners-club?tu=Happy81724 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Corona, CA